ESI AA330 Anweisungen - Seite 3
Blättern Sie online oder laden Sie pdf Anweisungen für Racks & Ständer ESI AA330 herunter. ESI AA330 4 Seiten. Articulating keyboard arm
Seite druckenSTEP 2: Attach Track
• Drill
/
" pilot holes through all
1
8
nine holes in the track.
— Drill the holes
deep, depending on which
wood screws will be used. (A
minimum work surface thickness
of 1
/
" is recommended for the
1
2
1" screws.)
CAUTION: Be careful not to drill through the
work surface.
• Attach the track with screws through the six rear
holes only, as shown.
STEP 3: Install Articulating Arm
• Slide the articulating arm onto
the track. Position it back far
enough so that you have access
to the front three holes on the
track.
STEP 4: Attach Front Stop
• Position the front stop onto the
front of the track and secure it
AA330 ARTICULATING KEYBOARD ARM
/
" deep or 1"
5
8
Front
Stop
Attach Through Rear
Six Holes Only
Slide Back
3