ACOUSTIC SOLUTIONS KL-1 POP IDOL Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Karaoke-Anlage ACOUSTIC SOLUTIONS KL-1 POP IDOL herunter. ACOUSTIC SOLUTIONS KL-1 POP IDOL 19 Seiten.
Seite druckenINSTALLATION AND POSITION
The KL-1 should be positioned on a flat stable surface.
This product contains sensitive electronic circuitry, it is not recommended that excessive force or heavy handling be applied to this product as internal
damage may occur. Do not place this product in areas where direct sunlight is present, nor place it adjacent to a radiator or other heating appliances.
Like all electrical devices this unit will generate a modest amount of heat. The cooling of this device is reliant upon the flow of air within the cabinet. Care
should be taken not to cover this unit with such items as rugs, covers or curtains which will restrict this air flow and may cause over heating.
Never allow the KL-1 to come into contact with water or liquids, and ensure that small objects do not fall through the ventilation grills. In the event of this
happening, disconnect the wall plug from the mains supply immediately, and contact your local dealer for service advice.
Do not position the power cable such that it can be walked upon, or damaged by regular traffic. Ensure that all other interconnect cables are stowed
safely behind the unit, and cannot be easily snagged or kicked thus causing possible damage to the unit.
Ensure that all interconnetion cables have been made correctly, and that polarity has been maintained.
It is necessary to remove the protective foam which surrounds the light lamps during transit.
DO NOT OPERATE THE LIGHT SEQUENCER WITH THIS FOAM IN PLACE AS THE HIGH TEMPERATURES GENERATED BY THE LAMPS WILL
CAUSE THIS PACKAGING TO MELT.
1) Carefully pull the foam packaging outwards from the area around the
lamps. Check that lamps are secure, but do not over tighten them.
2) Test the lamps first by pluging the AC power cord into the mains
wall plug, and pressing light sequencer power switch (33) to illuminate
the lamps. Check that all lamps are working before proceeding to next
instructions. Replacement lamps can be obtained:
R80 ES type, re order 01327 340601. Turn off light sequencer before
replacing lamps.
6