ClearOne MAX EX Installations- und Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Konferenztelefon ClearOne MAX EX herunter. ClearOne MAX EX 10 Seiten. Audio conferencing
Auch für ClearOne MAX EX: Spezifikationsblatt (3 seiten), Datenblatt (2 seiten), Broschüre (2 seiten), Installations- und Betriebshandbuch (11 seiten), Handbuch "Erste Schritte (2 seiten)

ClearOne MAX EX Installations- und Betriebshandbuch
12

Maintenance

Caring for your MAX EX

• Follow all warnings and instructions marked on your MAX EX.
• Unplug base unit and conferencing pod from the wall outlet before cleaning.
• Do not use liquid or aerosol cleaners. Use a damp cloth moistened with water to
clean the outside of your conferencing pod or base unit and power supply.
!

Electrical considerations

• Use only the power adapter that comes with your conferencing phone.

Troubleshooting

If you are having trouble with your MAX EX, it might be improperly set up or other
equipment might be malfunctioning.To begin, check for the following or consult the chart
on the next page:
• The MAX EX base unit is plugged into the proper volt electrical outlet and its
power light is on.
• Make sure cables are securely connected.
• The equipment the other party is using is comparable in quality to your MAX EX
conferencing phone and is working properly. While the MAX EX works with speak-
erphones, cell phones, handsets or installed conferencing systems, the quality of the
conference will be impacted if the party you are conferencing with has poor
quality equipment.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Maintenance
Maintenance
If you hear
No dial tone
Static or noise
Calls can come
in, but you can't
dial out.
Poor audio
It could be that
Try this
Base unit is not
Connect the base unit to the
connected to telephone
telephone jack using the
jack.
supplied telephone cable.
You are not using an
Check that you are using an
analog phone line.
analog phone line. Consult your
IT department for help.
Place the call again to see if
You have a bad
another line provides a better
telephone connection.
connection.
Plug a working phone into the
You have a bad
phone jack. If the line is still
telephone line.
noisy, call your telephone
company.
The other party's room
Ask the other party to turn off
is too noisy.
noisy equipment.
The dialing mode (tone
See page 10 for instructions
or pulse) is set
on changing the dialing mode.
incorrectly for your
service.
The equipment on the
The equipment should be upgraded.
far end is of lesser quality.
Participants can try sitting closer
to equipment and eliminate
background noises.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
13