ClearOne MAX WIRELESS Installations- und Betriebshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Konferenztelefon ClearOne MAX WIRELESS herunter. ClearOne MAX WIRELESS 11 Seiten. Clearone conference phones specification sheet
Auch für ClearOne MAX WIRELESS: Datenblatt (2 seiten), Spezifikationsblatt (3 seiten), Broschüre (1 seiten), Broschüre (2 seiten)
Seite drucken
14
If you hear
It could be that
Pod section is out of
Beeping sound
range
before dialing
Base unit is not powered.
No dial tone
Base unit is not
connected to telephone
jack.
You are not using an
analog phone line.
You have a bad
Static or noise
telephone connection.
You have a bad
telephone line.
The other party's room
is too noisy.
The dialing mode (tone
Calls can come
or pulse) is set
in, but you can't
incorrectly for your
dial out.
service.
Building construction is
Poor audio
limiting phone range.
The equipment on the
far end is of lesser quality.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Maintenance
Try this
Move pod section closer to the
base unit.
Make sure base unit is plugged
into a power outlet and the
Power LED is lit.
Connect the base unit to the
telephone jack using the
supplied telephone cable.
Check that you are using an
analog phone line. Consult your
IT department for help.
Place the call again to see if
another line provides a better
connection.
Plug a working phone into the
phone jack. If the line is still
noisy, call your telephone
company.
Ask the other party to turn off
noisy equipment.
See page 10 for instructions
on changing the dialing mode.
Move base unit closer to the phone.
The equipment should be upgraded.
Participants can try sitting closer
to equipment and eliminate
background noises.
Appendix
Appendix
Specifications
DIMENSIONS (W x D x H)
Phone section: 10.5" x 10.5" x 3"
(26.7 cm x 26.7 cm x 7.6 cm)
Base unit: 4.25" x 5.5" x 2.5"
(10.8 cm x 14 cm x 6.4 cm)
WEIGHT
Phone section: 2.7 lb (1.2 kg)
Base unit: .6 lb (0.27 kg)
Shipping: 10 lb (4.5 kg)
ENVIRONMENTAL
Operating Temperature: 0–50° C
(32–122° F)
Storage temperature: 5–70° C
(41–158° F)
Operating Humidity: 15 to 80%
Storage humidity: 10 to 90%
POWER
Pod section:
Custom battery pack with nickel
metal hydride batteries, 7.2 V
2200 mAh
12 hours continuous talk time
(typical)
Base unit:
Auto-adjusting power module;
100–240VAC; 50/60 Hz
TELEPHONE CONNECTION
Analog PBX or PSTN line
RJ-11C/CA11A, –12dBm nominal
KEYPAD
Alphanumeric standard keypad
LOUDSPEAKER VOLUME
90 dBspl A weighted @ 1 ft
Bandwidth: 200Hz - 3.3kHz
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
RADIO FREQUENCY
2.4 GHz WDCT
1.8 GHz DECT
(4) 32kbps full duplex
RECORD OUTPUT
Connector: 2.5 mm mono audio
jack
Impedance: <1000 ohms
Bandwidth: 200Hz–3.3kHz
Dynamic Range: 60dB
THD <.01%
ECHO CANCELLATION
Tail Time: 60 mS x 3
NOISE CANCELLATION
Dynamic noise cancellation
CERTIFICATIONS
FCC Part 15/ICES-003 Class A
FCC Part 15 Subpart C/RSS-210
FCC Part 68/IC CS-03
CE
UL, C-UL Certified
WARRANTY
2 Years
MODELS
Max Wireless WDCT*
Max Wireless DECT*
*Call your sales representative for part numbers.
15