ClearOne MAXTM EX Telephone Installations- und Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Konferenztelefon ClearOne MAXTM EX Telephone herunter. ClearOne MAXTM EX Telephone 11 Seiten. Clearone communications max ex installation & operation manual
Auch für ClearOne MAXTM EX Telephone: Installations- und Betriebshandbuch (10 seiten)
Seite drucken
6
Using your Max EX conferencing phone
To make a call
1. Press the
key. You will hear a dial tone.
ON/OFF
2. Dial the number as you would on a standard
phone. The number appears on the LCD
screen.
Note: You can also predial the number while in Standby (inactive) mode and press the
ON/OFF key to connect the call. Press and hold the pound key (#) to enter a pause in the
dialing string.
To answer a call
• Press any key on the keypad to answer the
call. When there is an incoming call, the
phone rings and the LEDs on the phone and
the phone icon on the LCD screen flash.
To end a call
• Press the
key. This will disconnect the call and return the phone to
ON/OFF
Standby mode.
To redial a number
1. Press the
key. You will hear a dial tone.
ON/OFF
2. Press
to dial the last number called.
REDIAL
Note: You can also press REDIAL while in Standby mode to display the last number called.
To connect the call, press the ON/OFF key.
To adjust ringer volume
• While the phone is ringing, press
VOLUME UP
• While the phone is inactive, press
VOLUME UP
melody will play once at the new level.
To mute the call
• While on a call, press
to mute the microphones (loudspeakers are not muted).
MUTE
• Press again to unmute.
To access your conferencing services provider
• Press the
key. This feature must be programmed before use. See
CONFERENCE
page 10.
To access your service center
• While in Standby mode, press and hold the
be programmed before use. See page 10.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Getting Started
Figure 5. Dialing screen
Figure 6. Incoming call
or
.
VOLUME DOWN
or
. The ringer
VOLUME DOWN
key for 2 seconds. This feature must
0
Getting Started
To store a number in the phonebook
1. Enter the phone number you want to store
while conferencing pod is in Standby mode.
2. Press and hold the
PHONEBOOK/EDIT
until the Phonebook and Program icons
appear on the LCD screen.
3. Assign a Phonebook location (
) by press-
0–9
ing the corresponding number key.
4. Press
again to save the entry.
PHONEBOOK
You will hear a confirmation tone.
5. To exit Phonebook Edit mode before saving
the entry, press
CLEAR
.
Note: You can easily add the last number you dialed to the Phonebook. Simply press REDI-
AL to display the phone number and follow steps 2–5.
To make a call using the Phonebook
1. Press
.
PHONEBOOK
2. Press the number key (
) that corresponds with the speed dial location. The
0-9
stored number will appear on the LCD screen.
3. Press
to dial the number.
ON/OFF
Note: You can also press the ON/OFF button to get a dial tone before entering the
Phonebook. This will cause the number to dial as soon as you select the speed dial location.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
key
Phonebook and Program icons
Figure 7. Adding Phonebook entries
7