ClearOne BMA 360 Schnellstart-Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Mikrofonanlage ClearOne BMA 360 herunter. ClearOne BMA 360 9 Seiten.
Auch für ClearOne BMA 360: Installationshandbuch (2 seiten), Schnellstart-Handbuch (5 seiten)
Seite drucken
BMA 360
Operating and System Requirements
System Power and Thermal
Power Source: PoE injector
•
Power Consumption:
•
100-240VAC, 50/60 Hz
•
23 Watt typical without speaker amp
•
Supported Operating Systems for CONSOLE AI software
Windows 8, Windows 10
•
Minimum System Requirements
Intel or AMD 6 with 1GHz or higher recommended
•
2GB RAM (or higher recommended)
•
500MB hard disk space (additional space is required to store site files and other project files)
•
Administrator permission to install and run the software
•
System Part Number
BMA 360: 910-3200-208
BMA 360 INTERNATIONAL: 910-3200-208-I
Setup
Step 1: Unpack the BMA 360
Inspect it carefully. If the shipment shows obvious signs of
damage, retain the original box and packing material for
inspection by the carrier. Contact the carrier immediately.
ClearOne is not responsible for product damage incurred
during shipment.
Step 2: Install the BMA 360
Connect Speakers
A good time to connect external speakers is before you install the BMA 360 in the ceiling.
With speaker wire (not included), connect external speakers to the Phoenix Euroblock connectors.
Important: Please note the following PoE requirements:
No speakers: 36W PoE, connected via P-Link or PoE++
•
Speakers: Requires 90W PoE or 70W PoE. Must be connected via direct PoE++ port on the BMA 360.
•
ClearOne recommends the following PoE power supply kits:
36W: ClearOne part number: 910-3200-202
•
70W: ClearOne part number: 910-3200-207
•
90W: ClearOne part number: 910-3200-209
•
6
55W at 1/3 power x 4 @ 1kHz
•
Thermal: 270 BTU/hr at max power
•
Operating Temperature: 14 °F/-10 °C to 104 °F/40 °C
•
ambient temperature.
QSG-0086-001 v1.0 October 2020
Quick-Start Guide