Camos CSA-345 Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Antenna Camos CSA-345 herunter. Camos CSA-345 9 Seiten. Fully automatic, auto-tracking satellite antenna with 3 multi-outputs

Seite drucken

2. Tracking mode

When the antenna has found the selected satellite, the satellite indicator goes out for 1

second and lights up again. Now the satellite is logged in and the tracking indicator

(TRACKING) lights up.

Sometimes it happens that the antenna at first stops and locks onto a different satellite

(depending on your position, signal strength and weather conditions). In this case the

indicator of the different satellite lights up for a second and goes out again. The

antenna has now recognized that it has found the wrong satellite and moves to the

correct position.

The controller will remember which satellite it last found and will always look for that

one when it is switched on again.

Now you can enjoy TV.

3. Standby / Sleep mode

When your vehicle does not move for a longer time (antenna keeps position) the

antenna automatically falls into a "Sleep" mode (Standby). That means the tracking

movements will be stopped (to avoid tracking noise).

If the antenna position is changed (vehicle starts moving again) the antenna

automatically starts the tracking mode (TRACKING) or search mode (SEARCH),

depending on how much the antenna position has changed.

You can also manually activate the standby / sleep mode:

After logging in (TRACKING mode indicator lights up) push the "SATELLITE SELECT"

button once. Now the SLEEP mode indicator lights up in addition and the antenna

stops moving. Recommended if the vehicle keeps its position during longer time

(Camping ground).

You can deactivate the SLEEP mode by pushing the "SATELLITE SELECT" button

once again.

If you completely switch off the antenna (e.g. overnight) the antenna will go to search

mode again after switching on the next day.

6. In case of problems

No reception / no picture:

a) Any obstacles (trees, buildings or roof constructions) between antenna and satellite?

Choose a different position with a clear line of sight to the satellite.

b) Correct installation of antenna cables? Defective cables (broken)?

Please check the cables!

c) Did you select the right satellite? Please check whether the satellite you have selected

on your receiver corresponds with the satellite you have selected on the control box.

d) Did you switch on both the control box and satellite receiver?

e) Power supply ok? Please check power cable(s).

If you want to use a different cable (from antenna to control box):

Only use high quality. low loss co-ax cable. The F-plugs must be high quality types as well,

because as well as the RF signal, the power supply voltage for the antenna passes down

this cable. Even small losses may have an effect on reception.

We strongly advise to use the supplied cables.