1 BY ONE Audio-Technica AT3600 Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Drehscheibe 1 BY ONE Audio-Technica AT3600 herunter. 1 BY ONE Audio-Technica AT3600 14 Seiten. Belt drive turntable with built in speakers

Cartridge Tracking Force Adjustment
The supplied Counterweight is suitable
for cartridges weighing between 3.0-6.0g.
1. Gently push and turn the counterweight onto the
rear of the tonearm (with the dial facing toward the
front of the turntable).
2. Pull the protector straight forward to remove it.
NOTE: Applying a downward force may cause
the stylus to come off the body. Only low volume
is outputted if the stylus has come off, or is about
to come off, so refer to "Replacing the stylus" to
reattach the stylus correctly.
3. Remove the tie-wrap and unlock the tonearm.
4. Lower the tonearm lift lever and position the cartridge in the space between the
tonearm rest and platter.
5. Carefully rotate the counterweight until the tonearm achieves a neutral balance.
The tonearm should return to this balanced position if it is moved up or down. This
adjustment must be done carefully.
Tonearm
Counterweight
Adjust so that tonearm is level and neutrally balanced
Counterweight
Tracking Force Dial
3.5
0
0.5
Center Line
0
Protector
3.5
0.5
0
6
6. Once the tonearm is correctly balanced, return the tonearm to its rest. Without
moving the position of the counterweight, gently rotate the tracking force dial until
the zero is in line with black center line on the rear of the tonearm. Check to make
sure the tonearm is still neutrally balanced.
0
7. Finally, rotate the counterweight and tracking force dial together counterclockwise
(as seen from the front) to adjust the tracking force according to the cartridge
manufacturer's recommendations.
NOTE: Each mark on the scale represents 0.1g. The recommended tracking force for
the factory-installed cartridge is 3.5g±0.5g. Carefully rotate the tracking force dial.
When "3.5" is centered over the black line on the top of the tonearm, please stop.
Connection to External Speakers with RCA Audio Cable
This turntable includes 4 built-in speakers and a built-in phono equalizer. If you wish to
use your own amplifier or speakers, please follow the instructions below:
0
0
7