ClearOne VIEW Lite EJ100 Schnellstart-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Medienkonverter ClearOne VIEW Lite EJ100 herunter. ClearOne VIEW Lite EJ100 9 Seiten. Digital av encoder, jped2000 based audio/video encoder

Seite drucken

VIEW LITE EJ100 ENCODER

CONNECTING THE EJ100 ENCODER

VIEW Lite EJ100 Front Panel

Power LED

Status LED

Indicator

LED

Power: Solid red indicates the unit is powered on.

Status:

Mode Switch: Set the mode for the RS-232 function. Under

the default Normal Mode, a RS-232 connection enables serial

command control of display or 3rd-party devices. Under Debug

Mode, it enables debugging.

DIP Switch: Routes audio and video together with IR, and USB

signals between DJ100 and EJ100 units. To route video from

a particular source to display, toggle switches on the EJ100 to

match the positions on the chosen DJ100. To unlink a EJ100

from an DJ100, reset the EJ100 factory defaults.

NOTE: Before using the DIP switch, check that routing operations

are not performed by other tools. If they are, the switch function is

disabled. Press and hold the Reset Button to enable the switch.

Mode

DIP

Switch

• Off (no light): Unit powered off, or in the boot process.

• Blinking blue: Unit is disconnected from the EJ100 or

an active video source, or the network is down.

• Solid blue: Unit is connected to the EJ100 and a video

stream is displayed.