Aimpoint Duty RDS Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Magnifiers Aimpoint Duty RDS herunter. Aimpoint Duty RDS 12 Seiten.

2.3 Install the sight

If the sight is equipped with the mount shown in Fig. 1,

follow the described procedure. For installation with other

mounts, see accompanying instruction.

a Loosen the screw (12) using the Torx T10 tool (3), and

clamp the locking bar (11) around the Picatinny rail.

b With the recoil stop positioned in a groove of the

Picatinny rail, push the sight forward (towards muzzle)

and tighten the screw using the tool. See Fig. 3.

c Tighten the screw until a light resistance is encountered.

Proceed with another 1/4 to 1/2 turn until fully tightened

(3 Nm / 2.2 ft·lb).

CAUTION: Do not overtighten.

Fig. 3 Install the sight