ClearSounds Connect 360 System Setup-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Hörgerät ClearSounds Connect 360 System herunter. ClearSounds Connect 360 System 2 Seiten.

3
Connect
You can use the Connect 360 System with televisions, computers,
smartphones, cell phones and portable media players.
This setup guide describes using the system in two ways:
With a television
Simultaneously with a television and a cell phone or
smartphone: If the phone rings while you listen to TV,
you can press
on the neckloop to answer the
phone, and then press it again to end the call. During
conversation, the TV mutes.
For connection information to the other devices, please
refer to the enclosed directions for use.
Connect the QLINK transmitter to a TV
OR
includes
headset jack
a 3.5 mm headset jack
1.
Connect
1.
Connect
to the 3.5 mm TV
to the black jack on
headset jack.
Note: When you try the
360 system, if the TV
mutes and you prefer
2.
Connect the
not
that
it
mute,
and white connectors to
connect the QLINK
the red and white audio-
transmitter
using
out jacks on the device
, instead (see
that is connected to the
TV cable (for example, it
might be a cable box, a
right).
DVD player or the TV
itself).
4
1.
Turn off both devices:
Press and hold until
the red light flashes.
Note: If you are simultaneously using a phone with the TV,
turn off the phone's
the phone user's guide).
2.
No 3.5 mm
3.
Press and hold until the lights flash blue and red:
.
red
When pairing occurs, the blue lights flash rapidly and
the neckloop emits a tone.
Note: If you are using a phone, turn on the phone's
and pair it with
the phone user's guide).
Pair
Press and hold
until tones occur
and the light is off.
. (For instructions, see
2 - 3 feet
. (For instructions, see
5
Volume
T-coil
1.
Switch your hearing
aids to the "T" mode.
1.
2.
Two clicks
2.
3.
Volume:
3.
Volume:
ClearSounds 1-800-965-9043
© 2011 ClearSounds
CS-CONNECT360SG Ver 1.0
Or
Two clicks