ClearSpan 104454 Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zelt ClearSpan 104454 herunter. ClearSpan 104454 15 Seiten. Poly shelters sunblocker pavilion
Seite druckenStep 7: Install a 2 socket cross coupling at the middle of the chord.
Step 8: Connect the chord to the legs via the 3-way "Ts" previously installed.
Step 9: Repeat the steps above to assemble the other end rafter exactly like the one you just made.
Step 10: Assemble your inside rafters. These are similar, but do not have the horizontal chord or
diagonal corner braces. Inside rafters have crossover fittings at the peak and just below the
bends in the leg sections.
Step 11: Add swivel sockets to the legs of both end rafters and 2 of the inside rafters. These will
later be used to connect diagonal struts. Look at the frame drawing to approximate the
locations of these couplings. On the legs of the end rafters, the should be a foot or so below
the bend. On the two inside rafters they should go a foot or so up from the bottom ends.
Typical Inside Rafter
Page 9