Bambi PT Series Handbuch für den Bediener - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für den Bediener für Ranges Bambi PT Series herunter. Bambi PT Series 12 Seiten.
Auch für Bambi PT Series: Handbuch für den Bediener (8 seiten), Handbuch für den Bediener (12 seiten)
Seite drucken
2
Operation
NOTE!
Please ensure that the pump motor filter
is screwed in before operating the compressor.
Fit with intake tube pointing down
Installing airline:
The airline should be fitted to the Filter regulator outlet "A"
Starting & Stopping
Plug the compressor into an outlet socket of nominal voltage.
All models:
Switch the compressor on by turning the red control
on top of the pressure switch to the "Auto" position.
The compressor will run until the pressure in the receiver
is at 8 bar. It will then cut out.
As air is used the pressure drops and the motor will
restart at the preset pressure.
There is approximately a 2 Bar differential.
Note!
Each time the compressor switches off, you will hear
a short hiss of air. You are hearing the unloader valve discharging the residual
delivery pipe pressure.
This is normal.
Adjusting Outlet Pressure
Use the pressure regulator to adjust the outlet pressure.
To increase line pressure, rotate the knob in a clockwise
direction; to decrease turn anti clockwise.
It is possible to lock the setting by
pushing the knob down until it "clicks" home.
There are two pressure gauges on each model.
The larger gauge indicates the air receiver pressure, the smaller gauge indicates the
air outlet pressure.
NOTE!
NEVER unplug the compressor when running. Always switch off using the red
control on the pressure switch to ensure the compressor discharges.
Failure to do so will cause damage and will invalidate your warranty.
A