ClearSpan 105366 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Gewächshaus-Bausatz ClearSpan 105366 herunter. ClearSpan 105366 13 Seiten.

CLEARSPAN

END FRAME KIT

™

INSTALL FILM END PANELS (continued)

5. Working from inside the frame, mark a 12"-16" border

along the door jambs. (Consult the diagram below.)

These 12"-16" flaps are wrapped to the inside of the

door frame once the final diagonal cuts are made.

6. Using the diagram below as a guide, cut the end

panel to remove the section that is shaded.

7. Fold flaps to the inside of the door frame and secure

to the jambs by attaching the 102197 U-channel over

the film using Tek screws. See diagrams on this page

and the following page.

ATTENTION: Do not wrap the film around the door

jambs. Consult the diagram to the right.

Remove the dark shaded portion of the end panel

material to create an opening for the door.

END PANEL

Wrap this portion of the end panel to the

inside of the door frame and secure with

U-Channel and Tek screws. See diagram

top right and next page.

Cut the film as needed so it wraps to the

inside of the frame without tearing.

Frame Brace

Diagram above shows the end wall and end panel as seen from inside a similar shelter.

12"-16"

Ground Level

Drawings may show a different but similar model.

Header

Cut film along

header as

needed.

Inside View

END PANEL

12"-16"

Frame Brace

Revision date: 05.18.10