ClearSpan Pro Solar Star R035B00009A Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Gewächshaus-Bausatz ClearSpan Pro Solar Star R035B00009A herunter. ClearSpan Pro Solar Star R035B00009A 13 Seiten. Greenhouse door kits

Seite drucken
Important Information ..............................................3
Door Frame Assembly .............................................5
Twin-Wall Single Swinging Door .............................7
Corrugated Single Swinging Door ..........................9
Shelter Care and Maintenance ................................11
Quick Start Guide .....................................................12
Door Frame Layout ............................................13
2

Table of Contents

SINGLE SWINGING DOOR KIT: READ THIS BEFORE
YOU BEGIN
The single swinging door kit is designed to attach to any
of these end frame kits: R020B00001, R024B00001,
R030B00001, and R035B00001. These instructions and
the instructions for the end frame are written to be used
together.
If you have not installed your end frame kit, consult these
instructions as you assemble the framing for both the
door and the end frame. Adjust dimensions as needed to
accommodate the door installation and location.
NOTE: The end frame is designed to frame an end of one
of our roll-form buildings (20', 24' 30' or 35' wide). Some
end frame components may not be used when a door is
installed in the end frame.
If you have already installed the end frame kit, use these
instructions to determine the best location for the door and
remove the end framing as needed to install this door kit.
Reinstall end frame as described in this guide.
If you are installing this door kit in an end frame that is
not identified above, use these instructions for critical
dimensions and details.
Consult the services of a qualified contractor if needed. It
is the responsibility of the owner/contractor to adapt these
instructions to safely and competently install this door in
an end frame or building that it was not designed for.
Complete these steps to begin and to install the door:
1.
Based on the dimensions of the door (or doors),
determine where you can position the door in the end
frame. Use the diagrams from both this manual and
the end wall assembly guide.
2.
Return to the end wall instructions and frame the end
wall as needed based on the door location. Secure the
door framing to the end wall framing.
3.
Assemble the door and attach the assembled door to
the door frame of the end wall.
NOTE: If you purchased a fabric end panel to cover
the end wall frame, install the panel before you install
the door; then remove the panel material as needed to
allow for the installation of the door.
If you purchased a polycarbonate package (8mm twin-
wall or corrugated), install those panels after installing
the door(s). Panels or parts of panels will remain from
the end panel kit resulting from the installation of the
door(s).
Revision date: 05.28.10