ClearSpan 103476 Gebrauchsanweisung - Seite 11
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Unterstände ClearSpan 103476 herunter. ClearSpan 103476 13 Seiten. Portable greenhouse 10' wide x 20' long
Seite druckenSection G - Install Main Cover
Step 1: Fasten a ratchet to the end conduit with a Tek screw in the bottom hole of the ratchet. The
ratchet should be about 6" in from the end of the conduit. Repeat this step in all four corners.
Step 2: Inside the shelter, use a Tek screw to attach a side ratchet to each corner connector as
shown above. Also install a ratchet on one side of the two bottom "T" connectors. These
ratchets should be installed on the sides of the shelter. You should have a total of (6) side
ratchets installed, (3) on each side.
Step 3: Make up a pair of cover conduits each the length of your shelter. Start each with an
unswaged section and add swaged sections to arrive at the correct length.
Warning: DO NOT INSTALL COVER ON A WINDY DAY AS DAMAGE TO IT MAY RESULT!
Step 4: Unpack the main cover and unfold it completely with the inside surface facing up.
Step 5: Locate the ends with strapping and line them up with the front and back of the shelter.
Step 6: Slide cover conduits into hem openings as shown in the next illustration.
End Ratchet Installed
Note: corner coupler shown above may differ from that supplied with this model
Side Ratchet Installed
Page 11