ClearStream 600DAC3 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung ClearStream 600DAC3 herunter. ClearStream 600DAC3 12 Seiten.

Seite drucken

In the event you experience a problem with your Clearstream Aerobic Wastewater Treatment

System or if service is required, you may reference the Clearstream Control Panel Cover for the name,

address and phone number of a local service person that can provide service for your Clearstream

Unit. After the expiration of your initial two year service policy provided by the system installer, you

may obtain a continuing service policy on a yearly basis which will include terms comparable to the

initial service policy from a local service person that is trained and certified by Clearstream.

In order for the Clearstream System to function at optimum performance levels, the system will

require periodic service. The normally expected service that is associated with the system includes:

Repair or replace aerator

Clean filters on aerator

Break up scum in clarifier

Pump sludge from aeration tank

Pump sludge from pretreatment tank

Check aeration diffusers

Check surge control weir

Check denite effluent return flow

Replace UV bulb (when UV is installed)

* Any sludge removed from pretreatment tank or Clearstream Unit must be disposed of according to all state, local and federal regulatory

requirements.

** Denite return is factory preset. In field adjustments allowed by Clearstream trained professional personnel only

To remove solids from pretreatment tank drop pump hose through access opening on top of tank

all the way through to the bottom of the tank. Pump out the whole tank volume, then fill the tank back

up immediately. To remove solids from aeration chamber, drop hose through access opening in tank

all the way to the bottom of the tank. Pump only 1/2 of the total tank volume and fill tank back up with

water immediately.

To determine if all system components are functioning properly, look and/or listen to see if the

visual/audio alarm system is illuminated or making a buzzing sound. If the alarm is activated, then

either the aerator has lost air pressure or the high level float inside the clarifier is indicating a high

water level condition. Verification of either condition can be made by checking air pressure from

aerator with a pressure gauge and opening the access opening to the treatment unit to see if the

water level inside the clarifier is at alarm level. After inspection of the clarifier, be sure to

securely fasten the access cover back in place and tighten the tamper resistant screws firmly.

To determine if the system has the desirable "mixed liquor" and effluent characteristics, first

remove the access cover. Monitor for odors coming from the tank. If the odor is a sweet or a musty

smell, the system is operating in a desirable aerobic condition. If the odor is foul or smells like a

rotten egg, then the system is operating in an undesirable anaerobic condition. Visually monitor the

"mixed liquor" for color. If the color is a brownish color, then it is operating in a desirable aerobic

condition. If it is grey or black in color, it is operating in an undesirable anaerobic condition. The

system effluent should be clear with very few noticeable light brown solids suspended in the

effluent. The effluent should not be dark or turbid in color or clear with great numbers of light

brown suspended solids noticeable. After inspection of the system's interior, be sure to securely

fasten the access cover back in place and tighten the tamper resistant screws firmly.

In the event the alarm panel light and buzzer is activated, call your local servicing dealer

whose name, address, and phone number should be affixed to the face of the panel.

OPERATING MANUAL

2 to 10 years

6 mos. to 2 years

2 to 5 years*

annually

6 mos.

6 mos. **

annually

3 of 12