Diy Kyoto Wattson Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Messgeräte Diy Kyoto Wattson herunter. Diy Kyoto Wattson 13 Seiten. Energy-saving device

Display options using the button.

Wattson only has 1 button.

When you first turn wattson on, the display will show the amount of power

your home is using in watts. This is the total number of watts your home

is consuming at that given moment.

By pressing the button once changes between the 4 main display modes.

To turn the display unit off, press and hold the button down for a

few seconds.

(If renewable energy functionality has been activated via the software

then more modes are made available through the pressing of this button.

These modes will be listed in the special renewable energy manual).

Mode 1 / Numbers only.

1 / Numerically in watts or £s (how much your electricity would cost if

you left everything in the house exaclty as it is for a whole year).

Mode 2 / Colours only.

2 / In softly glowing coloured light, which changes from blue, low usage

through purple, medium to red, high. This option turns wattson into a

rather lovely mood light.

Mode 3 / Colours and numbers.

3 / Both numerical display and coloured light together.

Mode 4 / Night Mode.

4 / This mode turns off the number display and reduces the number

of lights that are on as well as their brightness. Wattson continues to

receive and store data in this mode.

People measuring their wind/solar generated electricity have a further 3

options, Net Power (Used–Generated), Generated and Total Generated to

date. These options on wattson are turned on via the software, available

from www.diykyoto.com/holmes