DIY Retractable Awnings SunCover 4000 Installations-Manuale - Seite 4

Blättern Sie online oder laden Sie pdf Installations-Manuale für Zubehör DIY Retractable Awnings SunCover 4000 herunter. DIY Retractable Awnings SunCover 4000 11 Seiten.

Seite drucken

Determine Your Mounting Application:

Wall, Soffit or Roof Mount application based on mounting height requirements. Please review, "Site Preparation" BEFORE

making your final decision. Once the decision is made, you can move forward with determining the correct length lag

screws.

WALL MOUNT

Your goal is to mount the installation brackets to the most solid part of the structure available. When installing (on any surface)

you want no less than 2 ½" of lag penetration into the stud, roof rafter or floor joist. Anything less than the 2 ½" will compromise

the integrity of the installation.

Site Preparation:

Before you proceed, it's best to understand the product terms and important dimensions noted in this document:

A: Unit Width - the unit width is the overall width of the unit - end to end. The fabric will be 4 to 6 inches NARROWER than

the overall width.

B: Projection - the distance along the roofline that the unit will travel when fully extended.

C: Front Bar Height: The distance from the ground to the bottom of the front bar. This measurement is typically set at

6' to 7' high.

D: Mounting Height: The distance from the top of the installation bracket to the ground or decking surface.

E: Unit Clearance: From the top of the install bracket to the bottom of the arm when retracted. You'll need a minimum of 8"

of clearance - this includes any doors that open out, casement windows, vents, exterior mounted lights, etc.

SOFFIT MOUNT

ROOF MOUNT