Edgewater Networks 200EW/E Schnellstart-Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Edgewater Networks 200EW/E herunter. Edgewater Networks 200EW/E 7 Seiten. Networking router
Seite druckenStep 3 − Plan Your Configuration
The EdgeMarc 200EW/E can be deployed as a gateway router in a network. It can also be
deployed in a network behind an existing firewall. Based on your deployment criteria, consult
the following documents for further configuration:
•
EdgeMarc 200 Series Converged Networking Router Hardware Installation Guide
•
VoIP Operating System (VOS) for EdgeMarc User Manual
Helpful Hints
Although not recommended, the 200EW/E and IP phones can be installed behind an existing
enterprise firewall. In this instance, the firewall will have to be configured to allow access to and
from the 200EW/E's public IP address for the following ports:
Port Type
UDP
RTP
TCP
Telnet
FTP
MGCP
NTP
SIP
IP phones normally point to a local NTP server for their time reference. The NTP port 123
needs to be opened if your network does not have an NTP server.
Note:
Traffic shaping for this configuration is only available if the enterprise data
devices are also installed behind the 200EW/E.
Firewall Ports to Open
161 (SNMP) and 162 (SNMPTRAP)
1056 to 1255
SSH TCP 22 for remote management & TCP 80 for WAN
configuration-downloads
23
TCP 21 for stateful TCP-session control from 200 to Edgewater
FTP server
2427, 2429, 2432, and 2727
123
5060 and 5075
Page 5 of 7