ClearView RT-RT110 Installationsanleitung Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Kraftfahrzeuge ClearView RT-RT110 herunter. ClearView RT-RT110 20 Seiten.

Seite drucken
Assembly Instructions
Account for all parts listed in the Parts List.
1. Slide HUB ASSEMBLY onto
BALL MOUNT and insert into
vehicle RECEIVER HITCH.
Refer Images 2 & 3.
2. Secure the BALL MOUNT
with HITCH PIN.
Adjust HUB ASSEMBLY to
desired position.
3. Tighten the two M10 BALL
MOUNT CLAMP BOLTS to hold
CENTER HUB in place.
(For assembly only)
Refer Image 3.
4. Loosen or Remove all three M6
ARM CLAMP BOLTS from each
HUB ARM. Carefully insert the two
FLAP SUPPORT RODS thru HUB
ARMS. Place ROD END CAP over
the end of rods, hex side facing
away from the vehicle, insert END
CAP BOLT through END CAP
BOLT HOLE, tighten securely with
M5 NYLON INSERT HEX NUT.
Refer Image 4.
10
Rod End Cap
End Cap
Bolt & Nut
clearviewaccessories.com.au
Hub Assembly
Ball Mount (Example)
Purchase separately
Vehicle Bumper shown
with 2" receiver
Ball Mount Clamp Bolts
Arm Clamp Bolts &
Nuts (3) each Arm
Slot
Hub Arm
IMAGE 2
IMAGE 3
IMAGE 4
End Cap Bolt hole
End Cap Bolt hole