ClearView HD4112 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Modulator ClearView HD4112 herunter. ClearView HD4112 14 Seiten. Quad hdmi mpeg2 hd dvbt encoder modulator

Seite drucken

3.2 Starting

3.2.1 Beginning Setup

DEVICE Programming and Setup

1. Apply power.

2. Connect Audio / Video source

Connecting to the GUI Interface:

1. Connect an Ethernet cable directly to the Ethernet port on the rear panel of the encoder

and then connect the Ethernet cable to an Ethernet switch /router or connect an

Ethernet Cable to your PC.

2. Using a Windows-based PC Select Windows Icon

3. The default IP address is 192.168.1.138 Make sure your PC has the same 3 first section IP

range.

4. Key in the IP address in web browser 1 9 2 . 1 6 8 . 1 . 1 3 8

3.2.2 Step 1: Login and Adjust RF and Stream Settings

Default Password: 1 2 3 4

Encoder Programming and Setup via GUI Interface and click on

SETUP

then on

SETUP/RF

Out:

Set your channel here for each channel. Once set press the Save Settings button to the left.

It is the same with Output Level, QAM, LCNs, CN, FFT and GI. After setting parameters and

Saving, make sure you press 'Save Setting & Reboot System' so settings are permanently

stored.