DIYElectronics PRUSA I3 Handbuch erstellen - Seite 17

Blättern Sie online oder laden Sie pdf Handbuch erstellen für 3D-Drucker DIYElectronics PRUSA I3 herunter. DIYElectronics PRUSA I3 19 Seiten.

[8.2] Door Magnets

• Attach perspex magnet to the

inside of the perspex on the

top right corner using M3x20

screws, nuts and washers

* Please note top and bottom magnets are

labelled in seperate packets, do not get

these mixed up

• Attach enclosure magnet to

the inside of the enclosure on

the top right corner using an

M3x20 screw and nut

• Repeat these steps for the

bottom, make sure the inside

magnets line up with the

outside magnets

[8.2] Door Knob

• Insert M4x16 screw into the

door knob

• Fasten onto perspex using

an M4x16 screw, nut and

washer

* Do not overtighten to avoid cracking the

perspex