ClearWater Ozone Systems PRO400 Installations- und Wartungshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installations- und Wartungshandbuch für Water Filtration Systems ClearWater Ozone Systems PRO400 herunter. ClearWater Ozone Systems PRO400 8 Seiten. Circulation system

Seite drucken

PROGRAMMING INSTRUCTIONS:

To Set or Change the Time: To clear entire memory, press reset key. Hold

down the CLOCK key while pressing either the HOUR or MINUTE keys.

Continue pressing until the desired number is shown. Then simply lift finger

off the CLOCK key to set.

To Set program (On/Off Times): Press TIMER key once to enter into

program mode. Display will show "1 ON - - - -". Press the HOUR key and

then the MINUTE key to select the desired first ON time. Press TIMER key

once. Display will show "1 OFF - - - -". Repeat previous step to select the

desired first OFF time. Repeat the entire sequence to complete up to eight

ON/OFF times as desired. When programming is done, press the CLOCK key

then the SELECT key repeatedly until the indicator bar is above the word

"AUTO".

To Review Program: Press TIMER key repeatedly. When done, press the

CLOCK key to return to the time of day.

To Cancel/Change Part of the Program: Press TIMER key repeatedly until

the particular ON or OFF time appears. Set new ON or OFF time. (See: to set

programs)

To Override Automatic Operation: Press the SELECT key to move

indicator bar to the desired ON or OFF position. Note: Timer will not resume

automatic operation until indicator bar is repositioned above the word AUTO.

To Override Timer Status (On or OFF): Press "OVR", key. Timer will

resume automatic operation with the next opposite set point.