Artforma S1 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wetterstation Artforma S1 herunter. Artforma S1 19 Seiten.
Auch für Artforma S1: Benutzerhandbuch (6 seiten)

Description of the device
7. [MAX./MIN. /-] values
In the normal mode, use the button to read the minimum and maximum registered
temperature and humidity values.
In the setting mode, press the button to reduce values of specifies parameters. Holding
the button down will allow you to set the values quicker.
8. [OUTDOOR TEMP] button
Press the button to specify the colour of the temperature mode. You can choose from 17
colours of the light and assign them to a chosen temperature range. The colour will be
changing depending on the outdoor temperature. The data on the temperature are
collected from wireless sensors.
9. [RAINBOW] button
When the light is switched off, use the button to change its colour. The colours will
appear in the following order: white, red, orange, yellow, green, azure, blue, purple.
10. Power connector
11. [RCC] button
Press the button in order to switch to manual reception of time signal.
12. [SENSOR] button
Use the button to receive the data from transmitter.
13. [C / F] switch
The switch serves to select in which scale the temperature data should be displayed: in
Celsius degrees or Fahrenheit degrees.
14. [OFF/LO/HI] switch
In [OFF] position, the light will be switched off.
In [LO] position, the light will be dimmed.
In the [LO] position, the light will be bright.
4