Altrex MiTower Sicherheits- und Montagehinweise Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Sicherheits- und Montagehinweise Handbuch für Baumaschinen Altrex MiTower herunter. Altrex MiTower 20 Seiten.
Index
1. Introduction
2. Type of scaffold
3. Safety instructions
4. Parts
5. Mounting instructions
6. Check before use
7. Assembling the MiTOWER / MiTOWER+
8.
Assembling the MiTOWER STAIRS
9. Ballast
10. Moving the scaffold
11. Disassembly of the scaffold
12. Inspection, Care and Maintenance
13. Warranty conditions
14. Abbreviations and logos
1. Introduction
This manual applies exclusively to MiTOWER scaffold configurations (hereinafter: 'the scaffold') as described in this assembly
& user manual (hereinafter: 'the manual'). Prior to starting to assemble the scaffold, you should carefully read this manual. The
required scaffold should be assembled and used in accordance with this manual. All instructions in this manual have to be
followed strictly. Not following the instructions contained in this manual can easily result in serious accidents, serious injury or
death. Altrex cannot be held liable for any loss resulting from the assembly or use of an Altrex scaffold that is not in compliance
with the manual. The employer, supervisor and user are responsible for the correct use of the scaffold in accordance with this
manual and they must ensure that this manual is available at all times when work is being carried out using the scaffold.
Additional copies of the manual can be ordered from your Altrex dealer.
Local legislation and regulations might encompass measures in addition to those stated in this manual.
Altrex BV – Mindenstraat 7 – 8028PK Zwolle – The Netherlands - Tel.: +31 (0)38 455 7777
Internet: www.altrex.com
2. Type of scaffold
Standards
Category
Maximum platform height outdoors
Maximum platform height indoors
Maximum platform load
Maximum load on rolling tower
Maximum wind load
Minimum number of assembly persons
Annex
T1. Parts
T2. Mounting instructions
T3. Assembly steps even working heights MiTOWER / MiTOWER+
T4. Assembly steps odd working heights MiTOWER / MiTOWER+
T5. Configurations MiTOWER
T6. Configurations MiTOWER+
T7. Assembly steps MiTOWER STAIRS
T8. Configuration MiTOWER STAIRS
MiTOWER
ANSI A10.8
OSHA 1926
UL1322
EN1004
Light Duty, 25 lbs./sq.ft.
13'9"
13'9"
325 lbs.
325 lbs.
18 miles per hour
1
– Email: [email protected]
MiTOWER+
ANSI A10.8
OSHA 1926
UL1322
EN1004
Light Duty, 25 lbs./sq.ft.
20'4"
20'4"
500 lbs.
500 lbs.
18 miles per hour
1
www.altrex.com
EN
–
3