Acoustics QI0120 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Stereo System Acoustics QI0120 herunter. Acoustics QI0120 11 Seiten.

Seite drucken

Planning E120 positioning and back box locations

Use the guidelines below to plan the positioning of the back boxes, speakers, and cabling. Dimensions

should be checked prior to installation to ensure the layout works correctly with the supplied lengths

of cable.

If more than 7m of speaker cable is required then a suitable alternative such as QED 16/2 can be

purchased and cut to length.

Cut-outs for left and right ceiling speakers

Follow installation instructions supplied with speakers

7m maximum cable run from

speakers to E120 touch panel

using supplied cables

IMPORTANT DIMENSION

E120 must be located within

reach of a mains socket. The

supplied DC cable is 5m long

and should not be altered.

Double gang

back box for

E120 touch

panel

47mm deep

Single gang back box

for DC cable breakout

44mm deep (not supplied)

Mains

socket

Optional single gang back

box next to TV point

44mm deep (not supplied)

First fix basic wiring

A basic E120 system with auxiliary optical digital input will have the first fix cable requirement as shown

below.

Cut holes for required back boxes and speakers. Run speaker and power cables as shown, leaving the

length of tails accessible for second fix. Optional line input cable can be run at this point.

Notes:

Switched mains socket required next to the DC extension cable for the power supply to plug in.

Single gang back box can be used for the optical AUX input cable. The can be terminated using

an optical termination plate such as the Nexxia Digital Optical Module Insert.

The supplied antenna cable can be attached to a normal quality coax cable which then connects

to an external antenna. If an external antenna can not be fitted then place the supplied internal

antenna as recommended in the Antenna alignment section.

DAB / FM antenna

Tails approx.

100mm

Speker cables terminated

using IMO plugs

Supplied with touch panel

Mains

socket

Key:

Power cable

Speaker cable (left)

Speaker cable (right)

Optical mini TOSLINK (not supplied)

Antenna cable