Edic ENDEAVOR Schnelle Handbücher - Seite 4
Blättern Sie online oder laden Sie pdf Schnelle Handbücher für Bodenmaschine Edic ENDEAVOR herunter. Edic ENDEAVOR 15 Seiten. Multi-purpose extractor
Auch für Edic ENDEAVOR: Besitzer-/Bedienerhandbuch (17 seiten)
Seite druckenENDEAVOR 9000I-HSH CONTROL PANEL
1. POWER SWITCH TO VACUUM MOTOR.
2. POWER SWITCH TO PUMP MOTOR.
3. POWER SWITCH TO HEATER. LIGHT INDICATES HEAT ELEMENT IS ON.
4. SWITCH CONTROLS AUTO DUMP PUMP. LIGHT CONFIRMS POWER.
5. POWER PRIME/PRESSURE RELIEF VALVE. SET TO "P" TO RELIEVE
PRESSURE OR PRIME THE PUMP. DO NOT LEAVE UNATTENDED IN THE "P"
POSITION.
6. CIRCUIT LOCATOR. THE GREEN LIGHT WILL TURN ON WHEN THE TWO
POWER CORDS ARE CONNECTED TO TWO SEPARATE CIRCUITS.
7. PRESSURE GAUGE USED TO MONITOR PRESSURE. DO NOT EXCEED 1100PSI.
8. QUICK DISCONNECT FOR SOLUTION LINE. CONNECTS TO OPTIONAL 990RS
CHEMICAL FEED SYSTEM.
9. PRESSURE REGULATOR. TURN CLOCKWISE TO INCREASE PRESSURE AND
COUNTER-CLOCKWISE TO REDUCE PRESURE. DO NOT EXCEED 1100PSI
10. VACUUM HOSE CONNECTOR. CONNECT YOUR 1.5" VACUUM HOSE TO THIS
BARB.