Edic CR2 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Ultraschall-Schmuckreiniger Edic CR2 herunter. Edic CR2 9 Seiten. Professional restroom cleaner
Auch für Edic CR2: Besitzer-/Bedienerhandbuch (19 seiten)
Seite druckenUNPACKING YOUR NEW CR2:
When your machine is delivered, check the carton carefully
for signs of rough handling. If the machine is damaged, notify
the carrier immediately and request an inspection. Be sure
to keep the carton, packing inserts, packing lists and carrier's
receipt until the inspector has verified your claim.
EDIC's Liability ceases when the carrier picks up the ship-
ment. However, our customer service staff will be happy to
furnish any information needed in connection with the claim
and will attempt to expedite a resolution.
PLEASE READ BEFORE
OPERATING THE MACHINE:
Read the manual carefully and completely before attempting
to operate the unit. This manual has important information
for the use and safe operation of the machine. Keep this man-
ual handy at all times.
This machine has been engineered and manufatured to pro-
vide excellent performance and service. To ensure that your
equipment will continue to perform as intended:
•
Maintain equipment regularly- following the suggested
maintenance schedule provided.
•
Use only original EDIC parts when servicing.
•
Operate equipment with care.
If additional information is needed, please contact EDIC at:
800-338-3342 or email [email protected]
All information and specifications printed in the manual are
current at the time of printing; however because of EDIC's
policy of continual product development, we reserve the right
to make changes at any time without notice.
WARNING!
•
The machine was designed for use on hard surfaces,
carpet, floor and upholstery extraction applications as per
instructions and recommendations written in this manu-
al. Any deviation from its proper use or purpose and the
consequential damage that may occur is the sole responsi-
bility of the end user.
•
Disconnect the power cord from the outlet before ser-
vicing. Do not leave machine connected to an electrical
outlet when unattended.
•
Do not immerse or use this machine in standing water.
Such use may cause electric shock.
•
When using an extension cord, use only a 3-prong con-
ductor grounding cord-12 gauge wire or heavier.
•
To avoid electric shock, do not expose the unit to rain or
snow. Store it indoors in a heated location only.
•
Do not use the machine for dry vacuuming.
•
Use defoamer at all times to prevent damage to the vacu-
um motor.
•
Do not use water in excess of 130°F (54°C) in the solution
tank
•
To prevent seal damage and chemical build-up to the
pump system, run clean water through the solution lines
after each day's use.
•
Use only commercially available carpet cleaning solutions
and defoamer intended for use with machines of this type.
Do not use dyes, bleaches, ammonia, or other additives.
•
The use of powdered cleaning solution, if not diluted
properly, may result in damage to the pump. Powdered
chemical is not recommended. If powdered chemicals are
used, premix in a separate container before placing in the
solution tank.
•
Always read and understand your chemical's MSDS (Ma-
terial Safety Data Sheet) before use.
•
This equipment is not designed to handle or use combus-
tible/volatile substances such as gasoline or kerosene, in,
on, or near the machine. The use of such materials will
cause extreme hazardous condition.
•
Do not expose machine to freezing temperatures.
•
All repairs must be done by an authorized EDIC repair
station.
•
Do not use replacement parts other than original EDIC
parts.
•
Do not allow your spray stream to remain in one fixed
location as surface damage may occur.
•
Check that all spray nozzles are securely fastened. Loose
nozzles could be ejected from equipment at high speeds.
•
Prevent burns by wearing gloves or using a barrier to
remove hot quick disconnects.
•
This is not a toy. Keep away from children.
•
Do not pull by the power or use power cord as a handle.
Always unplug by grabbing the plug and pulling, do not
unplug by pulling the power cord.
•
Inspect cord for damage. Do not use damaged cords. Con-
nect only to properly grounded outlets.
•
Keep hair, fingers, loose clothing, and body parts away
from moving parts and openings.
•
Turn off all controls before disconnecting machine
•
Use caution with ejected liquid or chemicals. High pres-
sures and temperatures could be hazardous to nearby peo-
ple or surroundings.
FAILURE TO COMPLY WITH THE ABOVE
WARNING INSTRUCTIONS WILL
VOID THE WARRANTY.
2