Edic PTAC Besitzer-/Bedienerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Besitzer-/Bedienerhandbuch für Reinigungsgeräte Edic PTAC herunter. Edic PTAC 10 Seiten. Cleaning cradle

5. Move furniture as needed so you can easily maneuver the PTAC CRADLE.

6. Position the cradle about 2" in front of the PTAC wall sleeve.

7. Pivot the front of the cradle up by releasing the pins on the sides of the

Jack uprights. Lock into place with the pins.

8. Turn the jack handle cranks so that the front touches the bottom of the

ptac. Do not let the jacks lift or put upward force on the ptac. Only a bare

minimum of contact is necessary. Since the jacks lift independently of each

other, make sure your cradle is level.

9. Make sure sliding barn doors are shut.

10.

Take hold of top of PTAC and slide into cradle firmly

IN WALL

11.

Using your 2 gallon chemical sprayer with pre mixed chemical, spray the

rear condenser, pan, front evaporator core, heating element, side filter and

any part of the fan that is accessible. Do not spray the switch panel.

12.

Slide left barn door open. Attach your GALAXY PTAC MACHINE vacuum

hose to the left side of the PTAC pan and close barn door.

13.

Using the jacks, lower the side of the CRADLE with the vacuum hose. This

will direct the flow of the water toward the hose. You can also adjust the

front/back tilt function, as needed.

14.

Using the GALAXY machine's solution hose and spray wand, rinse all the

components that were previously sprayed from the top down. Using the

sprayer's stream, direct dirt and debris toward the vacuum hose intake.

15.

Vacuum up any residual moisture on the PTAC pan

BARN DOOR