AIMS Power PWRB1250W Gebrauchsanweisung - Seite 2
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Inverter AIMS Power PWRB1250W herunter. AIMS Power PWRB1250W 9 Seiten. Dc to ac power inverter
Seite drucken
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions, operating and
maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Basic Operation
•
Make sure that you choose the right operating voltage for both input and output of the inverter.
•
When unpacking, make sure that the inverter is in good condition. If any parts are missing or
broken, please call AIMS Power, Inc. at the number found on the warranty card.
•
Place the power inverter on a flat surface. Make sure it has adequate ventilation and is not in
direct sunlight. Fasten the inverter securely to the surface, using screws or some other
means. If holes are to be drilled, follow safe, proper installation techniques.
•
Before you connect the battery cables, make sure the power switch is in the off position.
Connect Red (+) battery cable to Red (+) inverter terminal. Connect Black (-) battery cable to
Black (-) inverter terminal. Connect Red (+) battery cable to Red (+) battery terminal. Connect
Black (-) battery cable to Black (-) battery terminal. Alligator clamp cables may be used but only
to connect to the battery. Do not use clamps on inverter terminals. Alligator clamps are not a
permanent solution. You may see a spark during connection.
•
Connect the ground cable to an earth ground, such as a metal water pipe or to the vehicle
ground when used in a vehicle if the inverter includes a ground port.
•
Turn the power switch to the on position, which is located on the front of the inverter. The
green LED light will confirm that AC power is present.
•
Before plugging the equipment into the inverter, make sure the equipment AND the inverter
are off. Turn inverter on first, then turn on the equipment.
•
The power inverter can be used either while the engine is running or off.
Warnings
•
Unplug the inverter when it is not in use.
•
If the AC inverter makes a beeping sound, turn off the equipment, unplug the inverter
and restart the vehicle's engine. The beeping sound is simply the low-battery warning,
which indicates that the voltage of your battery is getting low. If you do not re-start your
engine and continue operating the inverter, the inverter will automatically shut off, leaving
your vehicle's battery at about 10. 5 VDC. This will allow you to start your engine and resume