Fitel S233 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Medienkonverter Fitel S233 herunter. Fitel S233 5 Seiten. Ribbon splitter

3. Applicable fiber

Material

Diameter

Number of fiber

(*1) There are possibility of added the damage to the fiber, or impossible to split, because of

condition of fiber, cleaning, and S233 itself.

(*2) Required suitable Fiber guide for splitting purpose

4. Operating instructions

4.1.

Install of Fiber guide

Explanation of Fiber guide

Indicated number that located left side (refer to below figure) is number of fiber before splitting.

Both upper and bottom numbers that located right side are number of fiber after splitting.

Number of fiber before splitting

How to remove the fiber guide

Pinch the tip of fiber guide from both sides.

Pick the fiber guide toward to upside, and detach from stopper.

Pull the fiber guide from main body.

How to install the fiber guide

Install the guide pin into the notch, and push the fiber guide toward downside for fixing by stopper.

(*1)

Silica based fiber with UV coating

Fiber diameter: 0.125mm

Coating diameter: 0.250mm

Thickness of ribbon: 0.28 to 0.4mm

Pitch: 0.25mm

4 8 12 24

(*2)

Specification characteristic

So please confirm the split condition previously.

Number of fiber after splitting

-Additional explanation-

For example, upside is 3, and downside is

1, upside split fiber is 3 ribbon, downside

split fiber is single fiber.