dji MATRICE 200 series Haftungsausschluss und Sicherheitshinweise - Seite 8

Blättern Sie online oder laden Sie pdf Haftungsausschluss und Sicherheitshinweise für Drohnen dji MATRICE 200 series herunter. dji MATRICE 200 series 20 Seiten.
Auch für dji MATRICE 200 series: Wartungshandbuch (2 seiten), Schnellstart-Handbuch (15 seiten), Faq (2 seiten)

dji MATRICE 200 series Haftungsausschluss und Sicherheitshinweise
observe the following rules:
1. DO NOT use the aircraft in severe weather conditions. These
include wind speeds exceeding 12 m/s, snow, rain, smog, heavy
wind, hail, lightning, tornadoes or hurricanes.
2. Keep the aircraft at least 30 feet (10 meters) away from obstacles,
people, animals, buildings, public infrastructure, trees, and bodies
of water when in flight. Stay even further away from the above
objects as your altitude increases.
3. Be EXTRA cautious when operating the aircraft indoors. Some
features of the aircraft, especially the stabilization feature, may be
impacted.
4. Be sure to enable the Vision System when flying indoors. Note
that the Vision System may NOT work properly when it is flying
over water, over surfaces without a clear pattern, or in a dim
environment.
1.  Aircraft  and  battery  performance  is  subject  to  environmental 
factors such as air density and temperature.
a.  DO NOT operate the aircraft when the temperature is outside 
the range of -4° to 113° F (-20° to 45° C).
2.  DO  NOT  use  the  aircraft  near  accidents,  fire,  explosions, 
floods, tsunamis, avalanches, landslides, earthquakes, dust, or 
sandstorms.
Interference with Communications
1.  Check if any part of the aircraft has been hit or crashed. Contact 
DJI support or the authorized dealers when needed. 
2. Fly in open areas. Tall buildings or steel structures may affect the 
accuracy of the on-board compass and block the GPS signal.
3.  Avoid  interference  between  the  remote  controller  and  other 
wireless equipment. Make sure to turn off the Wi-Fi on your mobile 
device.
4.  Be  extremely  alert  when  fly  near  areas  with  magnetic  or  radio 
interference and M210 RTK is recommended in such environment. 
These include but are NOT limited to: high voltage lines, large 
scale power transmission stations or mobile base stations and 
broadcasting  towers.  Failing  to  do  so  may  compromise  the 
transmission quality of this product or cause remote controller 
and video transmission errors which may affect flight orientation 
and location accuracy. The aircraft may behave abnormally or go 
out of control in areas with too much interference.
Operating the Aircraft Responsibly
To avoid serious injury and property damage, observe the following
rules:
1. Make sure you are NOT drunk, or under the influence of drugs,
anesthesia, or suffering from dizziness, fatigue, nausea or any
other conditions, whether physical or mental, that could impair
your ability to operate the aircraft safely.
2. Pulling the left stick to the bottom inside corner and pressing the
RTH button at the same time will stop the motor when the aircraft
is airborne. The landing function of the aircraft will not be triggered.
DO NOT perform the aforementioned combination command
unless in an emergency situation. This function is turned off by
default. You may turn on this combination command feature via
the DJI GO 4 app.
3. Upon landing, power off the aircraft first, then switch off the remote
controller.
4. DO NOT drop, launch, fire or otherwise project any dangerous
payloads on or at any buildings, persons or animals, or which
could cause personal injury or property damage.
5. DO NOT use the aircraft that has been crashed or accidently hit,
or the aircraft that is not in good condition.
1.  Make sure you have been sufficiently trained and are fully aware 
of any contingency plans before accidents happen.
2.  Make  sure  you  have  a  flight  plan  and  never  fly  the  aircraft 
recklessly.
3.  Respect  the  privacy  of  others  when  using  the  camera.  Make 
sure you comply with local privacy laws, regulations, and moral 
standards.
4.  DO  NOT  use  this  product  for  any  reason  other  than  general 
personal  use.  DO  NOT  use  it  for  any  illegal  or  inappropriate 
purpose  (such  as  spying,  military  operations,  or  unauthorized 
investigations).
5.  DO  NOT  use  this  product  to  defame,  abuse,  harass,  stalk, 
threaten or otherwise violate the legal rights (such as the right of 
privacy and publicity) of others.
6.  DO NOT trespass into private property of others.

Flight Modes, Functions and Warnings

Flight Modes
To avoid serious injury and property damage, observe the following
rule:
DO NOT switch from P-mode to either A-mode or S-mode unless
you are sufficiently familiar with the aircraft's behavior for each flight
mode, since disabling GPS may result in being unable to land the
aircraft safely.
The aircraft will enter A-mode in the following two instances:
1. Passive: When there is weak GPS signal or when the compass
experiences interference where the Vision System is unavailable.
2. Active: Users toggle the flight mode switch to A-mode.
In A-mode, the Vision System and some advanced features are
disabled. Therefore, the aircraft cannot position or auto-brake in this
mode and is easily affected by its surroundings, which may result in
horizontal shifting. Use the remote controller to position the aircraft.
Maneuvering the aircraft in A-mode can be difficult. Before switching
the aircraft into A-mode, make sure you are comfortable flying in this
mode. DO NOT fly the aircraft too far away as you might lose control
and cause a potential hazard.
Avoid flying in areas where GPS signal is weak, or in confined
spaces. The aircraft will otherwise be forced to enter A-mode, leading
to potential flight hazards, please land it in a safe place as soon as
possible.
P-mode or S-mode is preferred for most flight scenarios. Users can 
switch to A-mode if P-mode or S-mode is unavailable. When flying in 
A-mode, take EXTRA precautions because some features are NOT 
available in A-mode. When flying indoors, the aircraft cannot perform 
precision hovering when flying above the surfaces that do not have 
a clear pattern. Refer to the "Vision System and Infrared  Sensing 
System" section for complete indoor flying criteria.
1. P-mode (Positioning): P-mode works best when the GPS signal 
is  strong.  The  aircraft  utilizes  the  GPS  and  Vision  System  to 
automatically  stabilize  itself,  navigate  between  obstacles  or 
track a moving object. Advanced features such as TapFly and 
ActiveTrack are enabled in this mode.
2. S-mode (Sports): S-mode is identical to P-mode in terms of flight 
controller settings, except that the handling gain values of the 
aircraft are adjusted in order to enhance the maneuverability of 
the aircraft. The maximum flight speed of the aircraft is increased 
in this mode.
3.  A-mode (Attitude): When neither the GPS nor the Vision System is 
available, the aircraft will only use its barometer for positioning to 
control the altitude.
If you intend to switch to modes that disable GPS assistance (e.g., 
A  mode),  you  are  required  to  accept  the  prompted  disclaimer 
to  enable  this  function.  If  this  function  is  enabled,  you  further 
understand and agree that data including  but not limited to flight 
telemetry  data  and  function  records  could  be  uploaded  to  and 
maintained on a DJI designated server.
Failsafe and Return to Home
1.  The Return to Home feature will NOT work if the GPS signal is 
insufficient  (GPS  signal  less  than  three  bars)  or  if  GPS  is  not 
active.
2.  Press the RTH (Return to Home) Button on the remote controller 
to initiate the Return to Home process instead of turning off the 
remote controller.
9