dji Phantom 3 Advanced Schnellstart-Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drohnen dji Phantom 3 Advanced herunter. dji Phantom 3 Advanced 10 Seiten.
Auch für dji Phantom 3 Advanced: Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (8 seiten), Installationshandbuch (5 seiten), Schnellstart-Handbuch (10 seiten), Benutzerhandbuch (14 seiten)
Seite drucken
7. Getting Ready for Takeoff
Remove the gimbal clamp as shown on the right.
Place your Phantom 3 Advanced on a flat surface,
in an open space, with the nose facing away from
you. Then follow the steps below in this order:
1
3
5
DJI GO
app
7
Tighten the propellers with both hands before each flight.
●
If you wish to record photos or videos, insert a Micro-SD card into the Camera's Micro-SD Card Slot.
●
The Flight Mode Switch is locked in P Mode by default. Refer to the User Manual to learn how to unlock the switch and change
●
to other modes.
When not in P mode, the Phantom 3 Advanced will only maintain altitude, not position, and will drift with wind or user input. Return
●
to Home is not available in F mode.
8. Flight
Safe to Fly ( GPS )
●
Auto Takeoff and Landing:
Your Phantom 3 Advanced can automatically takeoff and land at the tap of a button in the Camera screen of the DJI
GO app.
Tap and slide to confirm automatic takeoff.
The aircraft will automatically takeoff and
hover at 4 feet (1.2 meters).
2
Toggle the Flight Mode Switch on your Remote Controller
1
to the right (P Mode). P Mode is Positioning Mode, A
Mode is ATTI Mode, and F Mode is Function Mode.
Turn on the Remote Controller by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
4
Insert the Intelligent Flight Battery into your Phantom 3
Advanced. Turn on the battery by pressing the power
button once, releasing it, and then pressing and holding
for 2 seconds.
Ensure the LED on your Remote Controller is green,
indicating it is ready to be used.
Connect your mobile device to the Remote Controller
5
with a USB cable and launch the DJI GO app. Follow the
6
instructions within the app.
In the app, tap 'Camera'. Ensure your Phantom 3 Advanced
6
is ready to fly by completing the on-screen Checklist.
Beginner Mode is enabled by default when you launch
the DJI GO app for the first time. The aircraft's altitude and
flight distance are restricted when flying in Beginner
Mode. You can disable Beginner Mode in the Settings
Page of the DJI GO app.
8
Calibrate the compass by tapping the Aircraft Status
7
Bar in the app and selecting 'Calibrate'. Then follow the
on-screen instructions.
Attach the propellers with a black nut onto the motors with
8
black dot and spin them counter-clockwise to secure.
Attach the propellers with a grey nut onto the motors
without black dot and spin them clockwise to secure.
Before taking off, make sure the Aircraft Status Bar in the DJI GO app
indicates 'Safe to Fly (GPS)' or 'Safe to fly (non-GPS)' if flying indoors.
Tap and slide to confirm automatic landing.
The aircraft will automatically land.