dji Agras MG-1P Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Quadcopter dji Agras MG-1P herunter. dji Agras MG-1P 17 Seiten. Spreading systems
Auch für dji Agras MG-1P: Schnellstart-Handbuch (12 seiten)

Seite drucken

Maintenance

1. Clean the residue inside the spread tank and spreader regularly. It is recommended to use dry

compressed air and a clean, soft dry cloth. DO NOT rinse with liquids.

2. The spinner disk is a consumable part. If obvious signs of wear are noticeable, follow the steps

below to replace the spinner disk.

a. Make sure that the aircraft is powered off, and then unplug the Spreading System cable.

b. To unlock the spreader, pull the spreader lock knob out, rotate it 90°, and release. Then

rotate the spreader to detach it.

c. Remove the nut, washer, four M3×8 screws, and spinner disk at the bottom of the spreader.

Mount a new spinner disk and secure it using the washers, M3×8 screws, and nut.

d. Check the spreader lock knob is in an unlocked position. Insert the spreader with the knob

located to the left of the circular indentation on the spread tank.

e. Rotate the spreader to mount it to the spread tank. To lock the spreader, pull the spreader

lock knob out, rotate it 90°, and release. Make sure that the spreader is locked in position.

Lock

Spinner Disk

Washer

M3×8 Screws

Nut

Unlock