FITKIT FT300M Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laufband FITKIT FT300M herunter. FITKIT FT300M 16 Seiten.

then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B)

⚫ If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise, then

rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Picture A)

Multi-wedge Belt Tension Adjusting

When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the

abrasion, then you have to do some appropriate adjustment to facilitate the safe use.

Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the

treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made.

Method of judging which part is loose: Remove the four screws on protective cover, make the

treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the armrests, and tread the

treadmill belt slightly. (We advise treading the treadmill belts with the user's own weight)

A. The instantaneous step cannot stop the belt, the tightness is appropriate.

B. If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still

running, it indicates that the running belt is loose and appropriate adjustments must be made to

facilitate the safe use

C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but

the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments

must be made to facilitate the safe use.

Step 2: Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,

gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can

flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is very limited.

It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of

the multi-wedge belt into the state that it could be flipped by 80%.

Step 3: Finally lock the motor base, and install the front cover.

Silicone oil using method:

Before using the treadmill, please lubricate the treadmill with the method below:

A. Open the lubrication cover on the motor cover

B. Squeeze the silicon oil into the oil tank of treadmill. Please make sure the oil doesn't surpass the

90ml scale, otherwise the oil will leak out. Then put the lubrication cover back.

Picture A

Picture B

90ml Scale