FITNESS AUDIO DX6-TF Betriebshandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Mikrofonanlage FITNESS AUDIO DX6-TF herunter. FITNESS AUDIO DX6-TF 16 Seiten. Dual-channel three redundancy digital wireless microphone system
Seite drucken
DX6-DR / DX6-TF Dual-Channel Three Redundancy Digital Wireless Microphone System
SCAN mode setting
There are five scan modes for selection: A-SCAN, F-CH01, F-CH02, F-CH03 and F-CH04.
Mode
Function
When to choose
Auto freq hopping
1
Use MENU button to go to the SCAN mode page.
2
Press and hold SET button until the scan mode flashes to denote readiness for setting.
3
Press SET or MENU button to select a scan mode between A-SCAN, F-CH01, F-CH02, F-
CH03 and F-CH04. 6 seconds after selecting a scan mode, it will be automatically saved
and the mode will not change after reboot until the setting is changed again.
4
Without any button pressed, the transmitter will operate scanning and then change to A-
SCAN mode.
A-SCAN
The microphone will automatically
operate radio scanning to find and
locate a group of clear, interference-
free channels after entering A-SCAN
page and holding SET button.
◼
First-time operation.
◼
Obvious environmental
interference exists / happens.
◼
Only one DX6-DR system (two
transmitters) in the room.
Yes
F-CH01 F-CH02 F-CH03 F-CH04
There are four modes for selection.
Each mode includes several working
channels which are different from
those in any other mode.
◼
Two DX6-DR systems (four
transmitters) to operate
simutaneously in the same room.
◼
One system operates on F-CH01
and F-CH02 modes and the other
system on F-CH03 and F-CH04.
13
Yes