dji OK100 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kamera-Zubehör dji OK100 herunter. dji OK100 18 Seiten.

Firmware Update

Use DJI Mimo to update the DJI OM 4 firmware. It takes approximately three minutes to

complete an update.

Before starting an update, make sure that the battery level is at least 15% (at least two battery

level indicators illuminated). Connect DJI OM 4 to your mobile device and launch DJI Mimo.

You will be prompted if a new firmware update is available. To start updating, connect the

mobile device to the internet and follow the on-screen instructions.

Do not exit DJI Mimo while updating the firmware. Pay attention to on-screen prompts. The

system status indicator will blink green and red alternatively and become solid green once

the firmware update has completed successfully.

If an update is unsuccessful, restart DJI OM 4 and DJI Mimo, reconnect the Bluetooth, and

retry.

DJI OM 4 is designed to be folded for easier storage and transportation. Make sure to fold

DJI OM 4 when it is powered off.

Rotate the pan and tilt axis to align with the marks on the gimbal and fold DJI OM 4. Note that

the hole on the pan motor should be matched with the marker on the arm. DJI OM 4 will enter

storage mode and can be folded after powering off.