Akku Vision TEST TOWER Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Prüfgeräte Akku Vision TEST TOWER herunter. Akku Vision TEST TOWER 2 Seiten.
Auch für Akku Vision TEST TOWER: Handbuch/Sicherheitshinweise (15 seiten)
Seite druckenAKKU VISION TEST TOWER
QUICK START GUIDE
Welcome to the Quick-Start Guide for the Akku Vision Test Tower.
The Akku Vision Test Tower is a versatile battery test device that reads and analyses batteries of the
own brand E-Bike Vision and compatible batteries.
To perform a test you need several components.
The following components are included with
Additionally you need:
the purchase of the device:
• Akku Vision Test Tower
• E-Bike Vision Battery / compatible battery
• USB C to USB A cable
• Adapter suitable to battery
• Power supply 12 V
• PC/Laptop with Windows 10/11
• Software
64-bit operating system
A list of compatible batteries can be found on our website
www.e-bike-vision.de or www.akkuvision.de.
SOFTWARE
The software for testing a battery is available on our website under the following links. You can also
access detailed operating instructions on the installation and use of the software via the links. After
downloading, follow the installation guide and start the software.
https://www.e-bike-vision.de/
service/downloads/en
HARDWARE
Connect the Akku Vision Test Tower to an E-Bike Vision Battery and your PC as shown in the
illustration and connect it to a functioning power supply.
3
D-SUB 7-pin
Akku Vision GmbH - Akku Vision Test Tower Quick Start Guide
R
1.
Connect the Akku Vision Test Tower to the mains via the 12 V power supply unit.
2.
Connect your PC to the Akku Vision Test Tower via the USB cable.
3.
Connect the Akku Vision Test Tower to the battery using the adapter cable ( please make sure
that you use the adapter cable that matches the battery).
After you have selected and confirmed the connected battery in your software, you will get to the
overview with the parameters of the battery.
You can read out the following values and thus check the condition of the battery.
• Charge status
• State of Health (SOH)
• Charging cycles
• Voltage
• Current
• Temperature
• Remaining capacity
Depending on the battery, there is a possibility that some values cannot be displayed. By discharging
the battery with the Battery Vision Test Tower and graphically recording the discharge curve, you
can ensure the functionality of the battery and show your customer when they need a new battery.
WARRANTY CONDITIONS
https://www.akkuvision.de/
• Akku Vision GmbH, Industriestraße-West 6, 63808 Haibach, Germany, hereinafter referred to as
„Akku Vision", provides a 24-month guarantee for the product in addition to the legally applicable
downloads/en
warranty.
• If a Akku Vision product proves to be defective in functionality during the guarantee period,
Akku Vision will, in accordance with these warranty conditions, at its own discretion, repair the
product free of charge for the commercial reseller or provide a free replacement delivery of a
corresponding or similar Akku Vision product.
• The warranty statement requires that the commercial purchaser accepts this warranty statement
in writing to Akku Vision. This is done a) by filling out the claim form within 24 months from the
date of purchase on the Akku Vision homepage, available at www.e-bike-vision.de and b) by
presenting the original purchase receipt for the purchase of the Akku Vision products covered by
the warranty promise and c) by presenting the Akku Vision product, the error description, as well
1
as the proof that the defect in functionality occurred within the warranty period. This proof can be
provided in particular by presenting the purchase receipt.
USB Type C
2
P. 1/3
Akku Vision GmbH - Akku Vision Test Tower Quick Start Guide
SAFETY NOTES
•
•
•
•
•
• Full charging capacity
•
• Design capacity
• Software version
•
• Serial number
•
• Internal status
•
•
•
•
•
•
•
•
DISPOSAL
Electrical equipment marked with the cancelled waste bin symbol must not be
discarded in the standard household waste; instead it must be taken to a suitable
specialist disposal system.
P. 2/3
Don't make any changes on the Akku Vision Test Tower. Especially, consider that you are not
allowed to open the device, or rather modify it, otherwise you lose your warranty claim.
Read these operating instructions carefully before use! Improper handling of Lithium-
ion Batteries may cause fire, explosion or chemical danger. Check battery manufacturer
instructions.
Only discharge Li-Ion batteries. Do not discharge lead-acid, NiCd, NiMh or primary cells!
Do not use battery and/or charger for any other purposes.
Connect the device to a suitable mains supply, only. Disconnect the device from mains and the
battery pack if it is not in use for a longer time.
Children must not play with the device. The appliance cleaning and user maintenance must
not be made by children without supervision.
The device is designed for usage in a damp-free, dry and ventilated environment.
Do not expose the device to rain or hot conditions. Don't cover the charger.
Please keep the device clean and dry.
Do not discharge overheated battery packs. Battery packs must be at ambient temperature
before discharging. Stop the discharging process if the battery gets too hot during
discharging (>55-60°C).
Do not use the charger if there are any signs of damage. Do not open the charger or carry
repairs. Repairs must be carried from the E-Bike Vision service center, only.
Do not leave the device unattended during operation.
Do not touch the Akku Vision Test Tower and the battery with wet hands.
Do not connect the Akku Vision Test Tower and battery continuously.
Lithium-ion batteries must only be discharged on a noncombustible underlay. As well as the
device.
Discharge Lithium-ion batteries only under supervision!
Akku Vision GmbH
Industriestraße-West 6
DE-63808 Haibach
+49 (0)6021 3289288
Akku Vision GmbH - Akku Vision Test Tower Quick Start Guide
R
P. 3/3