fitness Gallary RX125v3 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Heimtrainer fitness Gallary RX125v3 herunter. fitness Gallary RX125v3 17 Seiten.

ELECTRONIC CONSOLE OPERATION

CONSOLE SPECIFICATIONS :

Cadence bar graph :

RPM measure :

Speed :

Pulse :

Watt :

Time :

BATTERY INSTALLATION :

1) Remove the battery cover from the back of the computer.

2) Insert two (2) AAA batteries into the battery compartment and reinstall the battery cover.

3) When the battery voltage becomes too low, the " Low battery " indicator will appear on the console

display, indicating that the batteries need to be replaced.

MEASUREMENTS DEFINITION :

1) TIME : Time is measured in minutes and seconds (min : sec).

There is a time of day clock and a workout time clock. The workout time will count up or down during

pedaling. If the user stops pedaling, the time count will stop after 3 seconds.

2) RPM / CADENCE : Cadence is the number of pedal revolutions per minute

(RPM). The average RPM value is shown on the bar graphic.

3) SPEED : The approximate speed of the wheel can be shown in kilometers per

Hour (KM/H) or miles per hour (MPH).

4) DISTANCE : The virtual distance traveled on the bike during the workout. The

distance is based on the speed of the wheel and the dimension of a wheel similar to the flywheel.

5) WATT : The actual power measured at any time during the workout. The watt value is based on the

resistance level and the wheel speed.

6) KCAL : The approximate level of calories burned during the workout.

7) HEART RATE : The average heart rate value emitted from the chest strap during the workout.

0-200RPM, 10RPM per bar.

0-240RPM

0-96 KM/H (0-60MPH)

Analog signal, 30-240 BPM

0-999 Watt

Countdown range : 1-99 minutes

Count up range : 00:01 – 99:59