dji Aeroscope Mobile Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drohne & Quadcopter Zubehör dji Aeroscope Mobile herunter. dji Aeroscope Mobile 15 Seiten. Stationary unit installation
Auch für dji Aeroscope Mobile: Benutzerhandbuch (7 seiten)
Seite drucken
- 1. Table of Contents
- 2. EN Disclaimer and Warning
- 2. Overview
- 2. Indicators
- 2. Rx1: Type 1 Receiver Status Indicator
- 2. Rx2: Type 2 Receiver Status Indicator
- 2. Rx3: Type 3 Receiver Status Indicator
- 2. Drone: UAV Information Capture Indicator
- 3. Product Profile
- 3. Introduction
- 3. In the Box
- 4. Electromagnetic Compatibility
- 5. Usage
- 6. Specifications
- 7. Compliance Information
Usage
Follow steps below to install and run the Aeroscope.
1. Open Aeroscope.
2. Make sure the CrystalSky monitor is securely
connected to the USB port.
3. Attach the antennas.
4. Install the Intelligent Batteries when using Intelligent
Batteries to supply power. Connect the power port
to a power outlet (100-240V, 50/60Hz) when using
the power port to supply power.
5. Press twice quickly and hold on the second press
to turn on Aeroscope.
6. Press and hold the CrystalSky's power button to turn
it on. Tap "Applications" then select "Aeroscope".
The Intelligent Batteries will charge when the power port is connected to a power outlet.
Refer to the DJI CrystalSky user guide for more monitor usage details.
Refer to the user manual built into the Aeroscope application for more usage details.
Specifications
Safety and Standards
Model
Ingress Protection Rating
Electromagnetic Compatibility
Electrical Specifications
Power Consumption ***
Input Voltage
AS-P1800
IP54 (Folded)
Aeroscope meets electromagnetic compatibility
requirements and the below criteria:
Europe:
EN 55032: 2015
EN 55024: 2010+A1: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
United States:
47 CFR Part 15, Subpart B: 2016
Approx. 70 W
Voltage range: 100 to 240 V AC
5