dji FC7BMC Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drohne & Quadcopter Zubehör dji FC7BMC herunter. dji FC7BMC 16 Seiten. Motion controller

DJI Motion Controller

Linking

Follow the steps below to link the motion controller and the aircraft.

The aircraft must be linked with the goggles before the motion controller.

Make sure that all devices are powered on before linking.

1. Press and hold the power button of the aircraft until the battery level LEDs start to blink in sequence.

2. Press and hold the power button of the motion controller until it beeps continually and the battery level

indicators blink in sequence.

3. The motion controller stops beeping when linking is successful and both the battery level indicators turn

solid and display the battery level.

The DJI Motion Controller must be activated before using for the first time. Make sure all devices are linked after

powering on the aircraft, goggles, and motion controller. Connect the USB-C port of the goggles to the mobile

device, run DJI Fly, and follow the prompts to activate. An internet connection is required for activation.

The motion controller has two modes: Normal mode and Sport mode. Normal mode is selected by default.

Zero attitude: the initial position of the motion controller that is used as a reference point when

any movements are made with the motion controller.

Before using for the first time, practice flying with the motion controller using DJI Virtual Flight.

User Manual

DJI Fly

App