dji OSMO POCKET 3 Sicherheitshandbücher - Seite 2
Blättern Sie online oder laden Sie pdf Sicherheitshandbücher für Digitalkamera dji OSMO POCKET 3 herunter. dji OSMO POCKET 3 12 Seiten.
Seite drucken
EN
Safety at a Glance
By using this product, you signify that you have read,
understand, and accept the terms and conditions of
this guideline and all instructions at https://www.dji.com/
osmo-pocket-3 EXCEPT AS EXPRESSLY PROVIDED IN AFTER-
SALES SERVICE POLICIES AVAILABLE AT HTTPS://WWW.DJI.
COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS
AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE
PROVIDED "AS IS" AND ON "AS AVAILABLE BASIS" WITHOUT
WARRANTY OR CONDITION OF ANY KIND.
1. DO NOT allow the product to come into contact with any
kind of liquid. DO NOT drop the product into water. If the
inside of the battery comes into contact with water, chemical
decomposition may occur, potentially resulting in the battery
catching on fire, and may even lead to an explosion.
2. Put out a battery fire using water, sand, a fire blanket, or a dry
powder fire extinguisher.
3. The product should only be used in temperatures from 0°
to 40° C (32° to 104° F). Before using the battery in a low-
temperature environment, it is recommended to charge the
battery fully to ensure the product performance.
4. DO NOT disassemble or pierce the product in any way or the
battery may leak, catch fire, or explode.
5. DO NOT drop or strike the product. DO NOT place heavy
objects on the product.
6. DO NOT heat the product. DO NOT put the product in a
microwave oven or a pressurized container.
7. DO NOT leave the product near heat sources such as a furnace
or heater. DO NOT leave the product inside of a vehicle on hot
days. DO NOT store the product in environments above 60° C
(140° F). The ideal storage temperature is 22° to 28° C (72° to
82° F).
8. DO NOT store the product for an extended period after fully
discharging the battery. Otherwise, the battery may over-
discharge and cause irreparable damage.
9. DO NOT use the OSMO POCKET
high-amplitude vibrations (such as installing on the handbar
of motorcycle or bike). Otherwise, the camera system and the
gimbal can be damaged.
1. Intricate components inside the Osmo Pocket 3 may be
damanged upon impact and cause the gimbal to malfunction.
Keep the Osmo Pocket 3 away from sand and dust to safeguard
the sensors in the motors.
2. Make sure there is nothing obstructing the gimbal when Osmo
Pocket 3 is powered on.
3. DO NOT manually adjust the axis lock frequently to avoid causing
the axis lock to malfunction.
4. The Osmo Pocket 3 is not water resistant. DO NOT use any liquid
cleansers. Only use a soft dry cloth to clean the Osmo Pocket 3.
5. DO NOT cover or touch the ventilation area of the Osmo Pocket 3
as it may become hot during use. The Osmo Pocket 3 will stop
shooting if any overheating is detected.
6. To prevent unnecessary gimbal and screen damage, place the
Osmo Pocket 3 into its case correctly.
1. It is a good practice to monitor the charging progress and
disconnect the product when fully charged.
2. Discharge the battery to 50% if it will NOT be used for 10 days or
more. This can greatly extend the battery life.
3. Discharge and charge the battery completely once every three
months to keep it in good condition.
4. Hold the Osmo Pocket 3 still when it is powering on to ensure it
starts up successfully.
5. Slight friction between the screen frame and the body is a normal
phenomenon and does not affect use when rotating the screen.
Specifications
Product Name
Model
Input
Battery Capacity
Operating
Temperature
Wi-Fi Protocol
Wi-Fi Operating
Frequency
Wi-Fi Transmitter
Power (EIRP)
Bluetooth Protocol
Bluetooth Operating
Frequency
Osmo Pocket 3
PP-101
5 V / 9 V / 12 V, max 3 A
1300 mAh
0° to 40° C (32° to 104° F)
802.11 a/b/g/n/ac
2.4000-2.4835 GHz, 5.150-5.250 GHz,
5.725-5.850 GHz
2.4 GHz: <23 dBm (FCC), <20 dBm (CE/SRRC/
MIC)
5.1 GHz: <23 dBm (FCC/SRRC), <20 dBm (CE)
5.8 GHz: <23 dBm (FCC/SRRC), <14 dBm (CE)
BR/EDR, BLE 5.2
2.4000-2.4835 GHz
TM
3 in the environments with
1