dji Zenmuse X5 Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Handbuch für Digitalkamera dji Zenmuse X5 herunter. dji Zenmuse X5 11 Seiten. For inspire 1 pro
Auch für dji Zenmuse X5: Benutzerhandbuch (17 seiten), Benutzerhandbuch (11 seiten), Benutzerhandbuch (18 seiten), Benutzerhandbuch (18 seiten)
Seite drucken
I see so many reports of people crashing their drones due to a prop "flying off". While I'm sure a prop can wear and /
or break I expect that most of the time it's down to a prop not being securely fitted in the first place. We humans tend
to make mistakes and when doing something repetitive like fitting props it's very easy to overlook something.
If using
self-tightening props
always wind them on and then hold the motor for the final tighten. With the Inspire you
to further reduce the risk of a prop working loose. If using DJI's new
can also fit
prop locks
quick release props
on
or Matrice then it's important to ensure that each prop has popped up into its locked in position. Watch
the
Inspire 1
the base of the prop and as you push down twist it; that way you can confirm it visibly raises on the springs as it
enters its locked position. With the quick release props you should confirm correct fitment by holding the motor and
attempt tuning the prop in both directions to check it's locked in.
Later during my pre-flight routine I always check the props again, it may seem a drag but a lost prop on a quad will
result in a crash, it's better to be sure that are fitted than to lose that expensive drone.
9. Use a pre-flight check list
Using a pre-flight check list can be dull, especially when you're excited and just want to get flying, however there's no
better way to make sure you've done everything you can to ensure a safe flight. It doesn't need to be overly
complicated, if you go silly and put every step down you'll find you don't bother using it at all. Just put the basics
down read through it as you set up. It can be as simple as the following...
Airframe: Prepare & check
RC: Fit iPad, cable & Hood
Antennas: correct position
Props & Locks: attach & check
RC Battery: Check min 75%
RC Switches: Correct mode & Gear Down
iPad: App running, map cached, Airplane mode, Volume Up.
Airframe: Position for takeoff
Props: 2nd check
Power On: Check battery 100%
Sensors: Compass 1400 – 1599
Sensors: IMU +/- 0.1
Failsafe: Set failsafe height
Satellite: At least 7 sats & safe to fly box
Flight Mode: Correct mode selected