dji ZENMUSE X5S Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Digitalkamera dji ZENMUSE X5S herunter. dji ZENMUSE X5S 19 Seiten.

ZENMUSE X5S User Manual

Always power off the battery during installation or removal.

It is recommended to wrap a dust cover around the lens to prevent contamination. DJI

produces dedicated dust covers for the DJI MFT 15mm f/1.7 ASPH and the Panasonic

Lumix 15mm f/1.7 . Other lenses may require a third-party dust cover.

Always tighten the Lens Lock after attaching the camera lens, as this reduces lens vibration

during flight. Always loosen the Lens Lock before attaching and detaching the camera lens.

Remember to use a filter that fulfils the weight requirements. For some lenses, use a filter and

a balancing ring/balancing cap simultaneously if required.

Some lenses must not be used with a lens hood. Check the table above for accessory

requirements for your lens.

Always hold down the lens release button before rotating the lens to detach it.

Always hold down the lens release button to unlock the lens lock.

Attach the camera body cap to the lens mount, and the lens cap and rear cap to the lens for

protection after removal.

Mounting the Zenmuse X5S to the aircraft

1. Remove the Gimbal Cap from the Zenmuse X5S.

2. Press the gimbal and the camera release button on the Inspire 2. Rotate to remove the Gimbal

Cap from the Inspire 2.

3. Align the white dot on the gimbal to the red dot on Inspire 2 and insert the gimbal.

4. Rotate the Gimbal Lock to the locked position by aligning the red dots.

1 1

Always ensure that the Gimbal Connector 2.0 on the Inspire 2 is in the right position when

mounting, otherwise the camera will not mount.

Remove the lens cap when the Zenmuse X5S is in use.

DO NOT detach the Zenmuse X5S when the aircraft is powered on.