dji zenmuse z30 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Digitalkamera dji zenmuse z30 herunter. dji zenmuse z30 15 Seiten.

Step 2- Prepare the Firmware Update Package

a. Download the firmware update package from the Matrice 600 page on the

DJI website.

(http://www.dji.com/matrice 600/info#downloads)

b. Insert the Micro SD card into your PC. Extract all the downloaded files into

the root directory of the Micro SD card. While the Matrice 600 is powered off,

remove the Micro SD card from your PC and insert it into the Micro SD card

slot on the gimbal.

Step 3- Upgrade the Firmware

a. Ensure the remote controller is powered off and then power on one of the

Intelligent Flight Batteries. The firmware upgrade will begin automatically

once all the Intelligent Flight Batteries are triggered.

b. It will take approximately 5 minutes to complete the firmware upgrade. The

gimbal will repeat a beeping pattern of four fast beeps to indicate that the

upgrade is in progress, and emit one slow beep followed by two fast beeps

to indicate that the upgrade has been completed successfully.

c. Check the upgrade status by opening the .txt file that is automatically

generated after the upgrade. You should see the text "result: successful"

in the .txt file if the upgrade is successful. Otherwise, try upgrading the

firmware again if you see the text "result: failed" in the text file or the gimbal

sounds a long beeping sound.