FITRE SnowBip RT3 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS FITRE SnowBip RT3 herunter. FITRE SnowBip RT3 4 Seiten. Arva 457 khz. electronic avalanche beacon

Seite drucken
EXAMPLES OF DISPLAY MESSAGES
· reading of the
· self-test cycle
charging state of
positively
the batteries
concluded
·
·
volume step 9+
arrow at the center
(max-plus
·
bargraph at 40%
sensitivity)
·
distance 56 meters
·
just manual
·
volume step 9
operation
·
switch then back to
volume 9, by
pressing the
key
WHEN AUTOMATION BARRED:
·
no additional acoustic "bips" near transmitting beacons
·
no automatic volume steps decrease in approaching
5 ARROWS
(DIRECTION)
BARRED CIRCLE
READINGS:
·
DISTANCE DIGITS
(0,1 m to 99 m)
·
% BATTERY
(6% to 99%)
·
MESSAGES
INVITATION TO
PRESS THE KEY
to reduce the volume
VOLUME STEP
(1 to 9): distance
range MIN to MAX
USER MANUAL
·
charging state of
the batteries: 10%
·
still efficient
batteries, but to be
changed as soon
as possible
·
arrow at the left
·
bargraph at 20%
·
distance 22 meters
·
volume step 8
BATTERY ICON
(% of charging state):
·
if flashing with
Ô
change batteries
as soon as possible
·
if flashing with
Ô
batteries no
more reliable
·
·
"change batteries"
·
change the
·
batteries as soon
as possible
·
·
arrow at center-
right
·
·
bargraph at 70%
·
distance 1.40
·
meters
·
volume step 3
·
BARGRAPH OF
10 CIRCLES
(measures the intensi-
ty of radio-signals)
"MANUAL" ICON:
·
if alone: volume step
is 9+ (max-plus
distance range, just
manual operation)
·
if with BARRED
CIRCLE: automation
is barred
SAND-GLASS ICON:
DON'T MOVE
WHEN LIT
INVITATION TO
PRESS THE KEY
to increase the volume
MULTI-BURIED
ICON
ARVA 457 kHz
ARVA 457 kHz
ELECTRONIC AVALANCHE BEACON
ELECTRONIC AVALANCHE BEACON
·
negative self-test
self-test cycle
cycle
negatively
concluded
"error" code 3
·
fault beacon or
batteries no more
reliable
·
automation barred
automation barred
·
radio-signal too
bargraph at 100%
"low" (Lo) for the
(saturation)
set volume-step
·
arrow and distance
volume step 2 and
not available
invitation to press
·
radio-signal too
the
key to
"high" (HI) for the
increase it
set volume-step
more transmitting
·
volume step 8 and
beacons detected
invitation to press
("multi-buried" icon)
the
decrease it
DURING SEND MODE (TRANSMIT)
·
continuos LED flashing
·
acoustic "bip-bip" pacifier tone every
10 minutes (exclusive of SnowBip RT3)
FROM SEND TO SEARCH MODE
· press shortly and consecutively,
3 times, the
MODE
key
DURING SEARCH MODE (RECEIVE)
·
special acoustic warning every 4 minutes
·
press shortly any key, once,
to get further 4 minutes of search mode
·
otherwise, with further acoustic warning,
SnowBip RT3 switches to SEND MODE
AUTOMATION BARRING ("multi-buried")
·
when just located the first buried beacon
(having not yet switched it off), press
shortly together the
and
barring automation
·
same operation for turning on
automation again
FROM SEARCH TO SEND MODE
· press for at least 2 seconds
the
MODE
key, up to an acoustical signal
key to
keys for
3