djpower DSK 2000 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DJ-Ausrüstung djpower DSK 2000 herunter. djpower DSK 2000 10 Seiten.

3. When LCD displays "Ready TO Fog", press "FUNCTION" button three times, then the LCD shows

"Timer Out". In this situation, user can adjust the smoke output volume in the Timer mode (the ranges

from 1% to 100%) by "UP/DOWN"buttons.

When LCD displays s "Ready TO Fog", press "TIMER" button, user can activate Timer mode and can

end this mode by pressing the "TIMER" button again.

Note: there is a Non-stop Burst function in Timer Out from 1% to 100%. Choosing this function can

make the unit generate continuous fog output under Timer mode.

4. When LCD displays "Ready TO Fog", press "FUNCTION" button four times, then the LCD shows

"VOLUME OUT". In this situation, user can adjust the smoke output volume in the Volume mode (the

range is from 1% to 100%) by "UP/DOWN"buttons. User can activate volume mode by pressing

VOLUME button when the LCD shows "Ready To Fog" and end this mode by pressing VOLUME

button again.

Note: there is a Non-stop Burst function in Volume Out from 1% to 100%. Choosing this function can

make the unit generate continuous fog output under Volume mode.

5. When LCD displays "Ready TO Fog", press "FUNCTION" button five times, then the LCD shows

"DMX512 Add". In this situation, user can adjust the DMX address by "UP/DOWN"buttons.

6. When LCD displays "Ready TO Fog", press "FUNCTION" button six times, then the LCD shows

"Wireless ON". In this situation, pressing either "UP" or "DOWN" button once can switch off the

wireless function. If the LCD shows "Wireless OFF", pressing either "UP" or "DOWN" button once can

switch on the wireless function

7. When LCD displays "Ready TO Fog", keep pressing the "MANUAL" button can force the machine to

generate 100% full fog output. As soon as you release the MANUAL button, the unit stops spraying

fog immediately.

8. There is an "Optoelectronics Fluid Sensor" inside the DSK-2000. Thus, when the fluid tank is empty,

the pump will be shut down automatically. At this time, the LCD screen will show "Empty Fluid". Please

refill the tank with sufficient fog liquid and keep pressing the MANUAL button until the "Empty Fluid"

disappears on the screen.

9. For DSK-2000, user can switch off the fluid sensor function if it is not needed. When LCD displays

"Ready To Fog", press "FUNCTION" seven times, the LCD screen shows "Fluid Sensor On". In this

situation, pressing either "UP" or "DOWN" button once can switch off the fluid sensor. If the LCD

shows "Fluid Sensor Off", pressing either "UP" or "DOWN" button once can switch on the fluid sensor.

6 / 10