djpower R-4 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DJ-Ausrüstung djpower R-4 herunter. djpower R-4 12 Seiten. Confetti canon

1. Safety instructions

2. This device is suitable for indoor use (not outdoors) only.

3. Unauthorized modifications will invalidate the warranty.

4. Repairs are to carry out by skilled workers only.

5. Use only fuses of the same type and original parts as spare parts.

6. To avoid fire and electric shocks protect the unit from rain and humidity.

Be careful with heat and extreme temperature!

Do not place the device in a location where it is exposed to extreme temperatures.

Operate the device only in an ambient temperature between 0°C (32°F) -

40°C (104°F). Do not expose the device to direct sunlight or heat sources.

Keep away from humidity, water and dust!

Avoid placing the device in a location with high humidity or excessive dust. Place no liquids

on or near the system.

Place the device on a firm ground!

To avoid vibrations always place the device on a firm ground.

Do not use chemicals for cleaning!

Use a clean and dry cleaning rag to remove dust. Metal parts can be cleaned with a

damped cleaning rag. Before cleaning always unplug the device from the power supply.

If the device is not working properly!

If problems occur unplug the device from the power supply. The user should not try to service

the device independently. All repairs and service must be performed by a qualified

technician.

Take proper care with the power cord!

Never pull the power cord to disconnect the device from the power supply, but remove the

plug with plug housing in the hand. If you do not use the device for an extended period,

unplug the device from the power supply.

Attention!

Damages caused by the disregard of this user manual are not to subject to warranty. The

dealer will not accept liability for any consequent secondary failures. Only skilled workers are

allowed to carry out the electrical connections. All electrical an mechanical connections

have to be carried out according to the European safety standards.