Custom Crimp CC200 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Elektrowerkzeug Custom Crimp CC200 herunter. Custom Crimp CC200 17 Seiten. Dial micrometer style adjustment
Auch für Custom Crimp CC200: Benutzerhandbuch (18 seiten)

Seite drucken
CC200 / CC400
PROBLEM: CRIMPER RUNS BUT IS SLOW OR NON-FUNCTIONAL
•
Check supply voltage to see that it matches the voltage specifi ed on the tag attached to the crimper.
•
If the crimper is connected to a three phase circuit, check all three legs of the circuit to be certain that all legs are hot.
•
Measure the voltage to the crimper when the crimper is under load. Voltage should be a minimum of 90% of line voltage
when the crimper is under load.
Many performance problems are the result of low voltage or inadequate electrical service.
•
Check motor rotation and be certain that the motor rotates in the direction of the arrow on the motor housing. For three
phase units rotation can be reversed by switching any two wires in the plug.
•
The circuit in the crimper is protected by a thermal overload relay. If the relay trips after resetting it from the master pow-
er switch, call for technical service.
PROBLEM: MOTOR RUNS BUT FOOT SWITCH WILL NOT OPERATE
•
Power to the secondary circuit is supplied from a 24 volt step down transformer. If the motor runs normally but the foot
switch will not function check the 2 amp slo blow fuse located in the control box as shown in the photo below.
PROBLEM: CRIMPER WILL CLOSE ON FITTING BUT DOES NOT DEVELOP POWER TO
COMPLETE THE CRIMP
•
Fitting is to large for selected crimp die. Select a crimp die that is closer to fi nal crimp diameter. Machine has built-in
safety bypass to protect internal components from damage due to incorrect die selection.
•
Check oil level. Position dies to the fully open position and check oil sight gage in rear of machine. Be sure the oil level
is in the middle of the sight glass. Use ISO 32 or 46 weight hydraulic oil.
If problem(s) persist contact Customer Service for additional troubleshooting assistance
General Production Hose Crimper
TROUBLESHOOTING
10